Updates

• 
  x l posted a topic in the forum News and Announcements:

  Aluminum machined fiber tap cone

  It is a ceramic fiber-shaped product that is oriented to meet the fire resistance and heat insulation of special parts of certain thermal equipment. The main applications are as follows: Burners, internal combustion engines, pressure vessels, and so...  moreIt is a ceramic fiber-shaped product that is oriented to meet the fire resistance and heat insulation of special parts of certain thermal equipment. The main applications are as follows: Burners, internal combustion engines, pressure vessels, and so on.
  Fiber Tap Cone is a ceramic fiber-shaped product that is used to meet fire resistance and heat insulation requirements in special parts of certain thermal equipment. It is suitable for use in gas heaters, air conditioners, heat pumps, boilers, and other heat equipment that generate high heat.
  Ceramic Fiber is made by pyrolysis of pure or complex minerals. The properties of the product can be changed and improved by modifying its shape, size, density, and addition of other materials. In general, there are seven main classes of ceramic fibers. Most commonly used in the construction industry: Glass fiber and Basalt fiber.
  The Fiber Tap Cone is a ceramic fiber-shaped product that is oriented to meet the fire resistance and heat insulation of special parts...    less

  • August 12, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Introduction to the characteristics of aluminum casting flux

  The aluminum casting flux is a yellow, water-soluble flux used for welding and auxiliary welding of aluminum products in a molten bath. This flux increases the surface tension of aluminum and reduces the melting point so the molten metal remains fluid,...  moreThe aluminum casting flux is a yellow, water-soluble flux used for welding and auxiliary welding of aluminum products in a molten bath. This flux increases the surface tension of aluminum and reduces the melting point so the molten metal remains fluid, allowing for easier pouring and pumping.
  aluminum casting flux is a product used in the welding of aluminum, it is non-toxic, non-corrosive, and has a high melting point.
  aluminum casting flux fine dissolving powder is the main raw material of aluminum spray. It is produced by special technology. The main component is acid salts, which have good corrosion resistance and metal cleaning ability.
  This is a product of aluminum metal casting. It is used to weld aluminum alloy and cast aluminum material, it has very high welding performance and is easy to use.
  It is used for casting aluminum products, and auxiliary welding of aluminum products.
  Flux is a chemical substance that decreases the melting temperature of certain metals, thus allowing them to be...    less

  • August 12, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Is the ceramic filter plate used correctly?

  1. Correct selection of porous ceramic filter
  The selection of the porous ceramic filter size and the number of holes must take into account factors such as the flow rate range of the specific casting type, the maximum metal level during filtration, the...  more1. Correct selection of porous ceramic filter
  The selection of the porous ceramic filter size and the number of holes must take into account factors such as the flow rate range of the specific casting type, the maximum metal level during filtration, the total filtration volume, and the cleanliness of the original aluminum liquid.
  2. The pretreatment of the melt filtration can not be ignored
  Such as normal slag removal and furnace cleaning of aluminum melting furnace and holding furnace; furnace refining, etc. In particular, the online degassing device is still necessary, because it can not only reduce the hydrogen content of the melt but also remove some non-metallic inclusions.
  3. The porous ceramic filter must be adapted to the square refractory brick
  The adaptation of the two facilitates sealing, which not only prevents metal from flowing into the casting box from the gap without being a porous ceramic filter but also prevents the foam filter plate from being too light and floating in aluminum...    less

  • August 8, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Is the ceramic filter plate used correctly?

  1. Correct selection of porous ceramic filter
  The selection of the porous ceramic filter size and the number of holes must take into account factors such as the flow rate range of the specific casting type, the maximum metal level during filtration, the...  more1. Correct selection of porous ceramic filter
  The selection of the porous ceramic filter size and the number of holes must take into account factors such as the flow rate range of the specific casting type, the maximum metal level during filtration, the total filtration volume, and the cleanliness of the original aluminum liquid.
  2. The pretreatment of the melt filtration can not be ignored
  Such as normal slag removal and furnace cleaning of aluminum melting furnace and holding furnace; furnace refining, etc. In particular, the online degassing device is still necessary, because it can not only reduce the hydrogen content of the melt but also remove some non-metallic inclusions.
  3. The porous ceramic filter must be adapted to the square refractory brick
  The adaptation of the two facilitates sealing, which not only prevents metal from flowing into the casting box from the gap without being a porous ceramic filter but also prevents the foam filter plate from being too light and floating in aluminum...    less

  • August 7, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Study on Purification of Porous Ceramic Filter

  Ispatguru porous ceramic filter Product Specifications / Specifications
  Ispatguru porous ceramic filter has the advantages of high porosity, low loss of thermal shock, high mechanical strength at normal and high temperature, large specific surface, good...  moreIspatguru porous ceramic filter Product Specifications / Specifications
  Ispatguru porous ceramic filter has the advantages of high porosity, low loss of thermal shock, high mechanical strength at normal and high temperature, large specific surface, good chemical stability and excellent filtering screen functions, filtering collection and adsorption adsorption especially for tiny impurity 1 ~ 10μm.
  The three-dimensional structure can improve cast quality in a wide range by changing molten metal from a swirl flow to a thin-layered flow, removing gass and smoothing casting. porous ceramic filter is not only applied for molten metal filtering in high temperature, but gas treatment in high temperature, catalyzer carrier, solid heat exchange and advanced filling for the chemical industry.
  Nowadays, the most promising vector in the industrial field of using reticulated polyurethane foam is considered to be the manufacture of porous ceramic filters.
  Using these filters, you can get rid of various additives...    less

  • August 5, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Study on Purification of Porous Ceramic Filter

  Ispatguru porous ceramic filter Product Specifications / Specifications
  Ispatguru porous ceramic filter has the advantages of high porosity, low loss of thermal shock, high mechanical strength at normal and high temperature, large specific surface, good...  moreIspatguru porous ceramic filter Product Specifications / Specifications
  Ispatguru porous ceramic filter has the advantages of high porosity, low loss of thermal shock, high mechanical strength at normal and high temperature, large specific surface, good chemical stability and excellent filtering screen functions, filtering collection and adsorption adsorption especially for tiny impurity 1 ~ 10μm.
  The three-dimensional structure can improve cast quality in a wide range by changing molten metal from a swirl flow to a thin-layered flow, removing gass and smoothing casting. porous ceramic filter is not only applied for molten metal filtering in high temperature, but gas treatment in high temperature, catalyzer carrier, solid heat exchange and advanced filling for the chemical industry.
  Nowadays, the most promising vector in the industrial field of using reticulated polyurethane foam is considered to be the manufacture of porous ceramic filters.
  Using these filters, you can get rid of various additives...    less

  • August 4, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Degassing effect of degassing unit

  Aluminium degassing unit With Nitrogen is normally accomplished the use of a rotating impeller deaerator (RID). In fact, now not all rotary deaerators are the equal. it's far essential to have an most suitable head design to produce high efficiency,...  moreAluminium degassing unit With Nitrogen is normally accomplished the use of a rotating impeller deaerator (RID). In fact, now not all rotary deaerators are the equal. it's far essential to have an most suitable head design to produce high efficiency, small bubbles. by using shortening the processing time and lowering the usage of gas, enormous cost savings may be executed.
   
  in the beyond, the metallic casting industry tended to simple head layout, lower production cost, however can produce large bubbles. because of decreased efficiency, this direction provides a false financial system.
   
  as soon as the degassing tool is completely diminished to the area wherein the liquid metal and the shaft are in place, Aluminium degassing unit With Nitrogen can start.
   
  The pleasant shaft position is barely off the middle line of the box to assist avoid vortex formation and its circular rotation within the liquid metal. The offset distance is 2-four inches.
   
  Adtech Aluminium degassing unit Unit...    less

  • August 3, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous Ceramic Filter Experiment

  A porous ceramic filter is mainly used for the filtration of aluminum and aluminum alloys in foundries and foundries. Clean aluminum melt can produce higher quality castings, less waste, and fewer inclusion defects.
   
  the porous ceramic filter has...  moreA porous ceramic filter is mainly used for the filtration of aluminum and aluminum alloys in foundries and foundries. Clean aluminum melt can produce higher quality castings, less waste, and fewer inclusion defects.
   
  the porous ceramic filter has excellent resistance to corrosion of molten aluminum, can effectively remove inclusions, reduce trapped gas in molten aluminum, and provide a laminar flow to make the filtered metal significantly cleaner.
   
  Cleaner aluminum will result in higher quality castings, less scrap, and fewer inclusion defects, all of which contribute to the bottom line of profit.
   
  the porous ceramic filter purifies the liquid aluminum alloy during the casting process through purification, reducing or eliminating various non-metallic inclusions and exhaust problems during the casting process.
   
  Due to defects such as non-metallic inclusions in the castings, the proportion of casting waste to the total number of castings is as high as 50%-60%.
   
  When various...    less

  • August 2, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Purification effect of porous ceramic filter

  A porous ceramic filter is mainly used for the filtration of aluminum and aluminum alloys in foundries and foundries. Clean aluminum melt can produce higher quality castings, less waste, and fewer inclusion defects.
  the porous ceramic filter has...  moreA porous ceramic filter is mainly used for the filtration of aluminum and aluminum alloys in foundries and foundries. Clean aluminum melt can produce higher quality castings, less waste, and fewer inclusion defects.
  the porous ceramic filter has excellent resistance to corrosion of molten aluminum, can effectively remove inclusions, reduce trapped gas in molten aluminum, and provide a laminar flow to make the filtered metal significantly cleaner.
  Cleaner aluminum will result in higher quality castings, less scrap, and fewer inclusion defects, all of which contribute to the bottom line of profit.
  the porous ceramic filter purifies the liquid aluminum alloy during the casting process through purification, reducing or eliminating various non-metallic inclusions and exhaust problems during the casting process.
  Due to defects such as non-metallic inclusions in the castings, the proportion of casting waste to the total number of castings is as high as 50%-60%.
  When various costs increase, the outflow...    less

  • August 2, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Type of refining flux

  508*508*50mm refining flux
  Aluminum alloy has good mechanical properties (high specific strength, specific stiffness) and good casting properties.
  Widely used in industry, it is an important structural material for automobiles, shipbuilding, aerospace...  more508*508*50mm refining flux
  Aluminum alloy has good mechanical properties (high specific strength, specific stiffness) and good casting properties.
  Widely used in industry, it is an important structural material for automobiles, shipbuilding, aerospace and other manufacturing industries.
  Especially in the aviation industry, the application is more and more extensive, and the quality requirements fo rrefining flux are getting higher and higher.
  In addition to ensuring chemical composition, mechanical properties and dimensional accuracy, castings are not allowed to have defects such as pores and shrinkage cavities.
  The 508*508*50mm refining flux can filter the slag in the aluminum solution.
  The smelting of aluminum alloy is a very important process in the production process of castings. The production experience over the years has proved that the control of the smelting process is not strict, and the castings are prone to pinholes, oxidized slag, shrinkage and other defects, directly affecting...    less

  • August 1, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Type of refining flux

  508*508*50mm refining flux
  Aluminum alloy has good mechanical properties (high specific strength, specific stiffness) and good casting properties.
  Widely used in industry, it is an important structural material for automobiles, shipbuilding, aerospace...  more508*508*50mm refining flux
  Aluminum alloy has good mechanical properties (high specific strength, specific stiffness) and good casting properties.
  Widely used in industry, it is an important structural material for automobiles, shipbuilding, aerospace and other manufacturing industries.
  Especially in the aviation industry, the application is more and more extensive, and the quality requirements fo rrefining flux are getting higher and higher.
  In addition to ensuring chemical composition, mechanical properties and dimensional accuracy, castings are not allowed to have defects such as pores and shrinkage cavities.
  The 508*508*50mm refining flux can filter the slag in the aluminum solution.
  The smelting of aluminum alloy is a very important process in the production process of castings. The production experience over the years has proved that the control of the smelting process is not strict, and the castings are prone to pinholes, oxidized slag, shrinkage and other defects, directly affecting...    less

  • August 1, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous Ceramic Filter Pore Size

  porous ceramic filter China removes non-metallic inclusions in the aluminum alloy melt and adopts furnace flux treatment. The technology of ceramic foam filtration outside the furnace has long become an important means of purifying molten...  moreporous ceramic filter China removes non-metallic inclusions in the aluminum alloy melt and adopts furnace flux treatment. The technology of ceramic foam filtration outside the furnace has long become an important means of purifying molten aluminum.
  Reflected in the smelting process's alloying, purification, and refinement processing technology. The smelting of aluminum alloy is the first step in the aluminum alloy processing process, and it is also a crucial link.
  Foam ceramic filter plate is a kind of porous ceramic product with opening porosity as high as 80-90%, volume density only 0.3-0.6gcm”, with a unique three-dimensional network framework and interpenetrating pore structure.
  The earliest foamed ceramic filter plate was developed by FRMollard and Davison of Consolidated Aluminum in the United States in 1978 and used in the aluminum alloy pouring system. Their research results were published at the American Foundry Annual Conference in April 1980.
  The foam ceramic filter plate filters and...    less

  • July 31, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous Ceramic Filter Pore Size

  porous ceramic filter China removes non-metallic inclusions in the aluminum alloy melt and adopts furnace flux treatment. The technology of ceramic foam filtration outside the furnace has long become an important means of purifying molten...  moreporous ceramic filter China removes non-metallic inclusions in the aluminum alloy melt and adopts furnace flux treatment. The technology of ceramic foam filtration outside the furnace has long become an important means of purifying molten aluminum.
  Reflected in the smelting process's alloying, purification, and refinement processing technology. The smelting of aluminum alloy is the first step in the aluminum alloy processing process, and it is also a crucial link.
  Foam ceramic filter plate is a kind of porous ceramic product with opening porosity as high as 80-90%, volume density only 0.3-0.6gcm”, with a unique three-dimensional network framework and interpenetrating pore structure.
  The earliest foamed ceramic filter plate was developed by FRMollard and Davison of Consolidated Aluminum in the United States in 1978 and used in the aluminum alloy pouring system. Their research results were published at the American Foundry Annual Conference in April 1980.
  The foam ceramic filter plate filters and...    less

  • July 31, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous Ceramic Filter ss

  porous ceramic filter can not only effectively remove the bulk heterogeneous impurities in the molten aluminum, but also filter out small inclusions of a few microns that cannot be removed by traditional processes. Since the hydrogen atoms and other...  moreporous ceramic filter can not only effectively remove the bulk heterogeneous impurities in the molten aluminum, but also filter out small inclusions of a few microns that cannot be removed by traditional processes. Since the hydrogen atoms and other harmful ions in the aluminum, the liquid is often adsorbed on the inclusions, and the inclusions can become the core of bubble formation, filtering the inclusions, can also reduce the harmful gases in the aluminum liquid.
  The Reticulated Foam Filter manufacturer will use a set of more complete measures to ensure the stability of the product, to ensure that the strength, through-hole rate, geometric size, appearance quality, and physical and chemical properties of the final product meet the standards.
  In production, in order to achieve a better filtering effect, the aluminum liquid upstream of the porous ceramic filter must have a certain degree of cleanliness, that is, the upstream aluminum liquid can be treated with traditional gas...    less

  • July 27, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filter firing

  switch off the heating unit after porous ceramic filter heating is finished. guide inert fuel into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature.
   
  check the sealing among...  moreswitch off the heating unit after porous ceramic filter heating is finished. guide inert fuel into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature.
   
  check the sealing among inlet/outlet and launder.
   
  test the cone located in heat protection draining inside the backside.
   
  test the molten aluminum temperature (min 720°C). Make the peak of molten aluminum be far from the launder bottom at 3cm for watching the molten aluminum going into thebox.
   
  The operator shall wear shielding clothes to close the duvet. The slag on the surface can be skimmed via the porous ceramic filter when the molten aluminum flows into the box.
   
  start manufacturing while the temperature is as much as 780°C. close porous ceramic filter outlet for heating renovation.
   
  Molten aluminum can be retained in the box with setting temperature during the warmth protection phase however with no molten aluminum...    less

  • July 27, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Installation of the degassing unit

  Switch off the heating unit after degassing unit heating is completed. Guide inert gas into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature.
  Check the sealing between inlet/outlet...  moreSwitch off the heating unit after degassing unit heating is completed. Guide inert gas into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature.
  Check the sealing between inlet/outlet and launder.
  Check the cone located in heat protection draining in the bottom.
  Check the molten aluminum temperature (min 720°C). Make the height of molten aluminum be away from the launder bottom at 3cm for observing the molten aluminum going into thebox.
  The operator shall wear protective clothes to close the cover. The slag on the surface can be skimmed through the degassing unit when the molten aluminum flows into the box.
  Start production when the temperature is up to 780°C. Close degassing unit outlet for heating preservation.
  Molten aluminum can be retained in the box with setting temperature during the heat preservation phase but with no molten aluminum handling.
  Guide inert gases into the rotor to prevent air outlet blocking by molten...    less

  • July 26, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Model of degassing unit

  degassing unit are brushed with boron nitride on the surface and are used for aluminum sheet casting.
  degassing unit for aluminum alloy casting and rolling mill, including fixtures and nozzle parts. The casting nozzle parts are set inside the fixture....  moredegassing unit are brushed with boron nitride on the surface and are used for aluminum sheet casting.
  degassing unit for aluminum alloy casting and rolling mill, including fixtures and nozzle parts. The casting nozzle parts are set inside the fixture. There are two sets of casting nozzle parts which are arranged next to each other in the width direction of the fixture, forming a multiple degassing unit structure.
  Each set of nozzle components includes the nozzle upper fan, the nozzle lower fan, the left side plate, the right side plate, the bottom plate and the wedge-shaped shunt block, and the left and right plates are deployed along the width of the fixture.
  The right side plate of the previous nozzle part is next to the left side plate of the next nozzle part, which constitutes the isolation structure between the nozzle parts; each set of nozzle parts is provided between the left side plate and the right side plate. A wedge-shaped shunt block, and the middle section of the bottom plate of each...    less

  • July 26, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Chinese ceramic foam filter is made from molten alumina fabric

  The ceramic foam filter is made from molten alumina fabric sintered at excessive temperature, with high energy and excellent adsorption performance. They may correctly clear out micron inclusions in molten...  moreThe ceramic foam filter is made from molten alumina fabric sintered at excessive temperature, with high energy and excellent adsorption performance. They may correctly clear out micron inclusions in molten aluminum.
  
  
  
  
  
  
  
   
  
  
  
  
  
  
  
  Casthouse Ceramic Foam filter manufacturers in China industries restricted said that the proper choice and layout of ceramic foam filters and filter holders may be very vital.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Adtech ceramic foam filters plate has 3 varieties of gaskets
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  1. Expandable gasket seal
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  2. Fiber cotton seal
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  3. Fiber paper seal
  
  
  
  
  
  
  
   
  
  
  
  
  
  
  
  Ceramic foam filters can help users to acquire this purpose, and filters assist to provide castings in unique shapes. Ceramic foam filters additionally has an excellent purification machine.
  
  
  
  
  
  
  
   
  
  
  
  
  
  
  
  Consequently, many industries have changed filters and produced extra worrying products, so that higher quality merchandise can be utilized in different industries.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  AdTech...    less

  • July 26, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Model of degassing equipment

  degassing unit are brushed with boron nitride on the surface and are used for aluminum sheet casting.
  degassing unit for aluminum alloy casting and rolling mill, including fixtures and nozzle parts. The casting nozzle parts are set inside the fixture....  moredegassing unit are brushed with boron nitride on the surface and are used for aluminum sheet casting.
  degassing unit for aluminum alloy casting and rolling mill, including fixtures and nozzle parts. The casting nozzle parts are set inside the fixture. There are two sets of casting nozzle parts which are arranged next to each other in the width direction of the fixture, forming a multiple degassing unit structure.
  Each set of nozzle components includes the nozzle upper fan, the nozzle lower fan, the left side plate, the right side plate, the bottom plate and the wedge-shaped shunt block, and the left and right plates are deployed along the width of the fixture.
  The right side plate of the previous nozzle part is next to the left side plate of the next nozzle part, which constitutes the isolation structure between the nozzle parts; each set of nozzle parts is provided between the left side plate and the right side plate. A wedge-shaped shunt block, and the middle section of the bottom plate of each...    less

  • July 26, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Molten Aluminium Degassing unit of Adtech

  Molten Aluminium Degassing unit of Adtech
  Molten aluminium (Al) is an extremely reactive substance. The molten metal is so reactive that it will readily decompose water in the atmosphere, or moisture on wet tools, releasing hydrogen into the melt. Even...  moreMolten Aluminium Degassing unit of Adtech
  Molten aluminium (Al) is an extremely reactive substance. The molten metal is so reactive that it will readily decompose water in the atmosphere, or moisture on wet tools, releasing hydrogen into the melt. Even small volumes of water condensing on a crucible furnace or transfer ladle can affect the quality of final castings. Excess hydrogen can affect the distribution of porosity, and the total amount of shrinkage, ultimately increasing scrappage. Eliminating gas absorption from molten aluminium is unfeasible. So, metallurgists tend to focus on preventing hydrogen introduction into the melt and removing as much as possible prior to casting.
  Why aluminum degassing is Important
  Aluminium and its alloys are susceptible to a unique form of chemical corrosion known as hydrogen-induced cracking, which is caused by the gradual diffusion of hydrogen (H) molecules through the metal’s crystal lattice. This creates a localised flaw within the alloy that can...    less

  • July 25, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filter brush edge

  porous ceramic filter is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to...  moreporous ceramic filter is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to provide customers with quality products! Our Casting Filter can ensure the production of high-quality cast aluminum for the porous ceramic filter.
  The casting Filter removes the inclusions generated between the refining system and the mold table.
  The ability of the ceramic foam filter to capture these inclusions is critical to maintaining a clean ingot during the solidification of the metal.
  Therefore, the quality and productivity of downstream operations such as forging, extrusion, and rolling are guaranteed.
  Keyword=aluminum ceramic foam filter, ceramic foam filter, ceramic filter plate, porous aluminum plate, silicon carbide ceramic foam filter, alumina ceramic filter, alumina foam filter, the molten metal filter, foundry filter, Cast filter.
  What...    less

  • July 25, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filter brush edge

  porous ceramic filter is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to...  moreporous ceramic filter is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to provide customers with quality products! Our Casting Filter can ensure the production of high-quality cast aluminum for the porous ceramic filter.
  The casting Filter removes the inclusions generated between the refining system and the mold table.
  The ability of the ceramic foam filter to capture these inclusions is critical to maintaining a clean ingot during the solidification of the metal.
  Therefore, the quality and productivity of downstream operations such as forging, extrusion, and rolling are guaranteed.
  Keyword=aluminum ceramic foam filter, ceramic foam filter, ceramic filter plate, porous aluminum plate, silicon carbide ceramic foam filter, alumina ceramic filter, alumina foam filter, the molten metal filter, foundry filter, Cast filter.
  What...    less

  • July 25, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Lining of degassing unit

  Trimet Aluminium degassing unit can remove oxides on the aluminum surface, thereby improving casting quality. Today, more and more aluminum plates and aluminum foil manufacturers are using these filters.
  Adtech is one of the largest ceramic foam filter...  moreTrimet Aluminium degassing unit can remove oxides on the aluminum surface, thereby improving casting quality. Today, more and more aluminum plates and aluminum foil manufacturers are using these filters.
  Adtech is one of the largest ceramic foam filter product suppliers in India and the global industrial market.
  The company provides the parameters and prices of aluminum degassing unit to customers who produce aluminum plates and aluminum foils through sales@alalloycasting.com.
  The liquid ceramic aluminum filter for aluminum casting is the most widely used filter in the field of aluminum melt filtration.
  The advantages are high porosity, high filtration efficiency, easy replacement, low cost, and strong adaptability, and can also be separated by filtering solid inclusions in liquid inclusions.
  The disadvantage is that the high-temperature strength is low, and the service life is short (mostly for single use) and the filtration capacity is small.
  Trimet Aluminium introduces the use of degassing...    less

  • July 25, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Turbo-degassing unit : rapid and

  Adtech degassing unit 10 / 20 /...  moreAdtech degassing unit 10 / 20 / 30
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  The ENA is suitable for system pressures from up to 0,8 bar. This makes the SOTEX ENA particularly suitable for use in heating systems in international horticulture. In these systems low pressures (about 0,8 to 1 bar) and hose systems are common networks. A hose just causes more air inlet into the heating water system than a steel heating system. The ideal situation for applying a vacuum de-aeration unit. Air in these heating systems causes poor water circulation and reduces power transmission. The SOTEX ENA prevents these inconveniences. Clients can choose between two ways of degassing unit;
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  - Turbo-degassing: rapid and effective degassing after installation, without gaps between the de-aerating cycles.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  - Normal venting: energy efficient operation by programming longer breaks between the de-aerating cycles. The user can choose between two ways of
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  By an RS 485 interface, all machine parameters are transferred to...    less

  • July 24, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filter cutting

  Alumina Porous ceramic filter clear out production technique-Sizing system, Sponge amendment system,, Dipping and sizing method, Drying process, Firing process, excellent inspection procedure.
   
  Sizing...  moreAlumina Porous ceramic filter clear out production technique-Sizing system, Sponge amendment system,, Dipping and sizing method, Drying process, Firing process, excellent inspection procedure.
   
  Sizing system
   
  the selection of formulation must make certain the exceptional consistency and fluidity of the slurry, if you want to ensure that the product may be sizing uniformly at some point of the sizing procedure to attain the required sizing weight. due to the fact, this is a prerequisite to ensure the product power and through-hole price are qualified. The adjusted slurry judges its performance with the aid of its particular gravity and consistency.
   
  Sponge change process
   
  Sponge modification is to put together for the sizing process to enhance the sizing performance of the sponge and make the sizing uniform.
   
  Dipping and sizing process
   
  The changed dry sponge product is uniformly coated right into a green frame thru the adjusted slurry on a roller press. For sponge merchandise with special a...    less

  • July 24, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filter packaging and storage

  Alumina porous ceramic filter production process-Sizing process, Sponge modification process,, Dipping and sizing process, Drying process, Firing process, Quality inspection process.
  Sizing process
  The choice of formula must ensure the best consistency...  moreAlumina porous ceramic filter production process-Sizing process, Sponge modification process,, Dipping and sizing process, Drying process, Firing process, Quality inspection process.
  Sizing process
  The choice of formula must ensure the best consistency and fluidity of the slurry, so as to ensure that the product can be sizing uniformly during the sizing process to reach the specified sizing weight. Because this is a prerequisite to ensure the product strength and through-hole rate are qualified. The adjusted slurry judges its performance by its specific gravity and consistency.
  Sponge modification process
  Sponge modification is to prepare for the sizing process to improve the sizing performance of the sponge and make the sizing uniform.
  Dipping and sizing process
  The modified dry sponge product is uniformly coated into a green body through the adjusted slurry on a roller press. For sponge products with different a meshes, slurry of different consistency is needed for sizing, o,therwise the sizing...    less

  • July 24, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Ceramic foam filters have a foam-like porous shape

  Ceramic Foam...  moreCeramic Foam filter
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Ceramic foam filters have a foam-like porous shape. They're
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  manufactured from refractory materials which might be proof against molten aluminum
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  erosion. Ceramic foam filters are particularly used in the area of metallurgy and
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  casting metal liquid filtration and purification to remove
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  undesirable nonmetallic inclusions and decrease trapped gasoline that
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  are contained inside the casting. There are three ceramic foam
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  filters, alumina, silicon carbide (SiC) and zirconia foam filters.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  They may be supplied in round, rectangular, square or other
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  custom designed shapes with exclusive pore sizes and porosities.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Extruded Ceramic foam filter
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Extruded ceramic foam filter has straight channels in honeycomb
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  shape. it is specially used in metallurgy and foundry industry to
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  clear out...    less

  • July 24, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Uses of Boron Nitride Coatings

  boron nitride coating represents the number of inches per inch. The higher the ppi value in the filter plate, the more holes per inch, and the smaller the holes, the better the filtering effect.
  If the hole is too small, the aluminum alloy will not...  moreboron nitride coating represents the number of inches per inch. The higher the ppi value in the filter plate, the more holes per inch, and the smaller the holes, the better the filtering effect.
  If the hole is too small, the aluminum alloy will not pass the fluidity limit, so you should choose the correct model.
  Aluminium Cff is formed by high-temperature sintering and forms interconnected openings on its outer surface and inside.
  When the fluid passes through the microporous channel, suspended matter, colloidal particles and macromolecular organic matter are captured on the surface of the product, and the fluid passes through the microporous channel to produce various physical and chemical effects for purification and filtration.
  boron nitride coating is very important for the quality of the molten aluminum melt, which greatly affects the subsequent processing performance and the quality of the final product.
  Therefore, all countries in the world attach great importance to the purification...    less

  • July 22, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Ceramic foam filter Dimension 660x660x50(26 inch)

  Ceramic foam filter 20 Inches is used to filter molten aluminum before casting. The filtration process removes particles that may cause waste in the final product. Use square ceramic foam filters plate aluminum liquid, use alumina refractory slurry as...  moreCeramic foam filter 20 Inches is used to filter molten aluminum before casting. The filtration process removes particles that may cause waste in the final product. Use square ceramic foam filters plate aluminum liquid, use alumina refractory slurry as raw material, impregnated with mesh foam with specific porosity. Then, the soaked foam is dried and fired in a kiln. After the foam burns, the porous ceramic body is left as a filter.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Ceramic foam filter Dimension 660x660x50(26 inch) 584x584x50(23 inch) 508x508x50(20 inch) 432x432x50(17 inch) 381x381x50(15 inch) 305x305x50(12 inch) 228x228x50(9 inch) 178x178x50(7 inch)
  
  
  
  
  
  
  
   
  
  
  
  
  
  
  
  When using a ceramic foam filter, install the Ceramic Foam Filters For Casting in the filters casthouse. Pour the molten aluminum into the filter box through a ceramic foam filter. The filter traps the fine particles in the molten metal. After the casting operation is completed, the aluminum slag remaining in the ceramic filter forms an almost solid piece...    less

  • July 22, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Degassing unit box

  France Aluminum introduces how to choose a degassing unit
  1. Look at its color.
  The color is pure, without impurities, indicating that the material is uniform.
  2. No sticky...  moreFrance Aluminum introduces how to choose a degassing unit
  1. Look at its color.
  The color is pure, without impurities, indicating that the material is uniform.
  2. No sticky hands
  It indicates that no adhesive is sprayed on the surface, which will not cause secondary pollution.
  3. No dregs
  Hold the degassing unit with one hand and tap the filter plate with the other palm.
  The continuous dripping of ceramsite residues indicates that the filter plate is of poor quality and will cause secondary pollution to the aluminum liquid.
  4. No cracking and slagging
  Use open flame or electric heating to heat red.
  Cool immediately at room temperature without cracking and slagging, indicating that it is a good filter plate.
  Adtech told France Aluminum through sales@alalloycasting.com that when purchasing filters, you should carefully evaluate the foam's effective specific surface area or porosity calculation.
  You can observe the homogenization state of the mesh surface of the filter plate, and then...    less

  • July 21, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Degassing unit efficiency is above 60%

  The Adtech Box type in-line rotor degassing unit is usually installed between the discharge outlet of the smelting furnace and the filter box. Melts flow into the BDU and rotate the rotor to break inert gases, forming a large quantity of dispersed...  moreThe Adtech Box type in-line rotor degassing unit is usually installed between the discharge outlet of the smelting furnace and the filter box. Melts flow into the BDU and rotate the rotor to break inert gases, forming a large quantity of dispersed bubbles, which then enter into the aluminum melts. After collision, capturing, surface adsorption and partial pressure action, the bubbles rise with gases and take hydrogen and oxide slags out of melts, making them into scums. Then, aluminum melts outflow from the degassing unit outlet, thus realizing the purpose of continuous in-line refining. •Adtech box-type in-line rotor degassing unit is designed based on the advantages of mainstream box-type degassing devices available in the market, with several key technologies, such as box sealing and anti-turbulence on the surface of aluminum liquid, improved ensuring high efficiency and continuous stability Low-cost operation.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Equipment Features • Degassing efficiency is above 60% -...    less

  • July 21, 2022
• 
  x l posted a topic in the forum News and Announcements:

  three rotors degassing unit

  Ceramic Filter Factory produces porous ceramic filter, which are used to filter solid impurities contained in molten aluminum. The removal of entrained solids from the liquid is accomplished by passing the solid-laden aluminum liquid...  moreCeramic Filter Factory produces porous ceramic filter, which are used to filter solid impurities contained in molten aluminum. The removal of entrained solids from the liquid is accomplished by passing the solid-laden aluminum liquid through a porous filter medium that does not pass through the solids.
  Molten aluminum usually contains entrained solids, which are harmful to the final cast metal product. These entrained solids usually have the following sources.
  Some are alumina particles, the floating oxide layer on the surface sucks them into the liquid stream.
  Some of the entrained particles are fragments from the furnace lining, conveying trough and other parts of the molten aluminum processing equipment, which are eroded and entrained in the furnace.
  In the flowing aluminum stream, some particles are precipitates of insoluble impurities, such as intermetallic compounds, borides, carbides, or other aluminum compounds (such as chlorides).
  When these impurities appear in the final cast product after...    less

  • July 21, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Alumina ceramic foam filter can effectively remove the non-metal

  Alumina ceramic foam filter is a new type of low density, high porosity, and with a three-dimensional network skeleton structure of ceramic foam filters. And widely used in the aluminum process industry for molten aluminum filtering, so as...  moreAlumina ceramic foam filter is a new type of low density, high porosity, and with a three-dimensional network skeleton structure of ceramic foam filters. And widely used in the aluminum process industry for molten aluminum filtering, so as to improve aluminum quality. Alumina ceramic foam filter can effectively remove the non-metal solid mixture from aluminium and aluminium alloy fusant, reduce trapped gas and provide laminar flow and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, to improve the quality of aluminum alloy and other non-ferrous alloy castings, all of which contribute to reduce casting cost, its maximum service temperature of 1200° C.
   
  Alumina ceramic foam filters have the advantages of high porosity, high mechanical strength, stable chemical property, strong corrosion-resistant, high adsorption rate, excellent filtering functions and thermal...    less

  • July 20, 2022
• 
  x l posted a topic in the forum News and Announcements:

  There are three types of online degassing unit

  coaching of scrap aluminum
  to begin with, the primary category of waste aluminum, graded stacking, along with pure aluminum, deformed aluminum alloy, cast degassing unit, combination and so forth.
  For waste aluminum merchandise, they have to be...  morecoaching of scrap aluminum
  to begin with, the primary category of waste aluminum, graded stacking, along with pure aluminum, deformed aluminum alloy, cast degassing unit, combination and so forth.
  For waste aluminum merchandise, they have to be disassembled to cast off metal and different non-ferrous metal parts linked to the aluminum cloth, after which made into waste aluminum cloth via the techniques of cleaning, crushing, magnetic separation, and drying.
  For metallic middle aluminum stranded cord, the steel middle must be separated first, and then the aluminum cord has to be wound right into a coil.
  Iron impurities are very dangerous to the smelting of waste aluminum. whilst there is too much iron, brittle metallic crystals are formed in porous ceramic filter out, thereby lowering its mechanical properties and weakening its corrosion resistance.
  The iron content material must typically be controlled beneath 1.2%.
  there may be no very successful approach in the degassing unit to satisfactorily cast...    less

  • July 20, 2022
• 
  x l posted a topic in the forum News and Announcements:

  The Ceramic foam filter can improve the cleanliness

  What Does a ceramic foam filter work? It may effectively cast off inclusions in molten aluminum and absorb tiny particles of first-class inclusions. Ceramic filter plates play a critical position in the aluminum alloy casting industry. if...  moreWhat Does a ceramic foam filter work? It may effectively cast off inclusions in molten aluminum and absorb tiny particles of first-class inclusions. Ceramic filter plates play a critical position in the aluminum alloy casting industry. if you are inquisitive about our merchandise, please experience unfastened to touch income@adtechamm.com.
  It is extensively utilized in aluminum alloy casting enterprise. With the continuous improvement of the overall performance necessities of aluminum and aluminum alloy products, new necessities are continuously recommended for aluminum liquid filtration, which requires the castings to have the traits of high purity, much less floats, and solid aluminum liquid flow to obtain castings. Aluminum merchandise has higher bodily and chemical houses and processing houses so that you can meet extra stringent conditions of use and attain the motive of extending the provider existence of aluminum products.
  What Does a Ceramic foam filter get rid...    less

  • July 20, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Refining flux manufacturing site

  Metal Metallurgy Casting Foundry refining flux
  Metallurgy is to remove impurities (non-intentional elements) in the metal solution by melting (heating above the melting point) for slag formation and slag removal, while certain chemical components...  moreMetal Metallurgy Casting Foundry refining flux
  Metallurgy is to remove impurities (non-intentional elements) in the metal solution by melting (heating above the melting point) for slag formation and slag removal, while certain chemical components are relatively pure by slag removal, decarburization, deoxidation, etc. The process of alloy composition. The finer refining process is generally a metal foundry.
  refining flux has always been the subject of research on aluminum alloy casting and rolling, and the purity of the nitrogen used for refining in the purification device is a key factor that directly affects the purification effect.
  refining flux is the purpose of spraying Nitrogen into molten aluminum to remove hydrogen.
  In addition, degassing is also considered to be a very effective way to float impurities.
  Two main theoretical modes have been proposed to explain the principle of degassing. The macro mode considers that the removal of each impurity is similar in nature. The...    less

  • July 20, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Aluminum Rotary Degassing System

  rotary degasser is an advanced molten aluminum purification equipment with built-in advanced heating elements.
  According to the requirements of the casting process, the internal temperature is effectively controlled, and the online degassing...  morerotary degasser is an advanced molten aluminum purification equipment with built-in advanced heating elements.
  According to the requirements of the casting process, the internal temperature is effectively controlled, and the online degassing device is used to remove the gas and harmful impurities in the aluminum and aluminum alloy melt.
  The aluminum and aluminum alloy melts are introduced into the purification equipment, and the inert gas is sprayed into the melt through the rapidly rotating rotor to form a large number of dispersive small bubbles.
  In the process of floating in the solution, the small bubbles physically substitute hydrogen and other inclusions to the surface of the solution, so that the aluminum and aluminum alloy solution can achieve the effect of degassing and removing impurities.
  The rapid stirring in the solution by the rotary degasser can make the alloying elements of the aluminum alloy solution more uniform.
  Effectively improve the quality of castings.
  To ensure...    less

  • July 19, 2022
• 
  x l posted a topic in the forum News and Announcements:

  represents the pore length of the foundry filter plates

  Casthouse aluminum ceramic foundry filter out is an economical technique of casting off aluminum inclusions in aluminum melting and casting plant...  moreCasthouse aluminum ceramic foundry filter out is an economical technique of casting off aluminum inclusions in aluminum melting and casting plant life.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  due to the unique conditions of use, the real impact typically will increase with the lower of dimensions of the filter plate hole and the float price of the molten aluminum.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  The steel Foam filter out has been in particular treated and isn't always without difficulty damaged. The ceramic filter out has high electricity, exceptional aluminum water erosion performance and suitable thermal performance. it's far an excellent choice for the production of numerous castings.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  the manufacturing process of steel Foam filter is typically to squeeze out excess and dry polyurethane sponge in ceramic slurry, and eventually fireplace and knot at high temperature to shape a 3-dimensional porous ceramic material with associated original bubble shape.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  thinking about the filtration efficiency and...    less

  • July 19, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Professional Porous Ceramic Filter

  Preparation of scrap aluminum
  First of all, the primary classification of waste aluminum, graded stacking, such as pure aluminum, deformed aluminum alloy, cast aluminum alloy, mixture and so on.
  For waste aluminum products, they should be disassembled to...  morePreparation of scrap aluminum
  First of all, the primary classification of waste aluminum, graded stacking, such as pure aluminum, deformed aluminum alloy, cast aluminum alloy, mixture and so on.
  For waste aluminum products, they should be disassembled to remove steel and other non-ferrous metal parts connected to the aluminum material, and then made into waste aluminum material through the processes of cleaning, crushing, magnetic separation, and drying.
  For steel core aluminum stranded wire, the steel core should be separated first, and then the aluminum wire should be wound into a coil.
  Iron impurities are very harmful to the smelting of waste aluminum. When there is too much iron, brittle metal crystals are formed in porous ceramic filter, thereby reducing its mechanical properties and weakening its corrosion resistance.
  The iron content should generally be controlled below 1.2%.
  There is no very successful method in the aluminum industry to satisfactorily remove excess iron from scrap aluminum,...    less

  • July 19, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filter for filtration of molten aluminum

  porous ceramic filter
  Hello everyone, welcome to see the small series of articles, today and everyone to introduce about high temperature plugging related knowledge.
  Everyone knows that there will be a lot of high-temperature melting in industrial...  moreporous ceramic filter
  Hello everyone, welcome to see the small series of articles, today and everyone to introduce about high temperature plugging related knowledge.
  Everyone knows that there will be a lot of high-temperature melting in industrial production, but the high-temperature liquid after high-temperature melting will enter the mold through the launder and form the products commonly used in daily life.
  Have you noticed a word here?
  Correct! ! ! That is the flow cell, because there are many paths in the flow cell, and the flow cell can not be replaced frequently, so a material is extended – “high temperature plug”.
  porous ceramic filter is divided into several categories: thermal insulation caps, plugging sleeves, aluminum silicate high temperature plugs, aluminum water plugs, aluminum silicate plugs, so it is well understood.
  One of its biggest uses is to change the path of high-temperature liquid inside the launder, which is the word commonly used in industrial...    less

  • July 19, 2022
• 
  x l posted a topic in the forum News and Announcements:

  porous ceramic filter for aluminum melts

  Types of filters for various metals
  1.porous ceramic filter
  If metal is necessary for filtering – this is steel, then filters made on the basis of zirconium oxide are perfect for this purpose.
  They can be used at a temperature of 1700 degrees...  moreTypes of filters for various metals
  1.porous ceramic filter
  If metal is necessary for filtering – this is steel, then filters made on the basis of zirconium oxide are perfect for this purpose.
  They can be used at a temperature of 1700 degrees Celsius, however, if the application is not long, then it is possible to use from a higher temperature.
  Steel filtration requires absolute chemical purity and high strength and reliability since this metal is used (especially for high-alloy steel alloys) in very important areas that do not tolerate errors and low-quality products – aviation, rocket science, energy, and other similar industries.
  Filters from zirconium oxide perfectly remove slag from the melt (due to the three-dimensional structure of the porous ceramic filter), and also leave large foreign bodies on the surface.
  Small ones are delayed at a different level of the filter, not reaching the molten metal.
  2. Filters for cast iron and copper (as well as its alloys)
  If it is necessary to...    less

  • July 18, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Porous ceramic filters in Wenxian

  porous ceramic filters presents a number of difficulties. The low density of aluminum alloys contributes to the formation of gas shells and porosity, since gases easily penetrate into the metal medium and saturate it. Aluminum is easily oxidized. It is...  moreporous ceramic filters presents a number of difficulties. The low density of aluminum alloys contributes to the formation of gas shells and porosity, since gases easily penetrate into the metal medium and saturate it. Aluminum is easily oxidized. It is difficult to clear the melt of slag and oxides.
  Slag and oxides remain in the melt in finely divided form in a suspended state, which significantly affects the quality of the alloy.
  The use of porous ceramic filter or modifiers also does not allow the melt to be cleaned completely, since it is difficult to separate them from the melt.
  In the preparation of aluminum alloys, the purity of the starting materials and the accuracy of the composition of the charge are especially important.Often, insignificant amounts of harmful impurities significantly impair the mechanical properties of the alloys.All this necessitates a particularly careful sorting of waste. Without remelting, they can only be used if their chemical composition is known.Scrap...    less

  • July 18, 2022
• 
  x l posted a topic in the forum News and Announcements:

  The Filter Box And Ceramic Foam Filters To Make Them Close

  The ceramic foam filter is made of structured foam sponge and high purity ceramic materials, its interior is full of crisscrossing and penetrating micropore, which can efficiently intercept and adsorb the tiny impurities...  moreThe ceramic foam filter is made of structured foam sponge and high purity ceramic materials, its interior is full of crisscrossing and penetrating micropore, which can efficiently intercept and adsorb the tiny impurities in molten aluminium, it will help to solve the slag inclusion problem in aluminum casting.
  Advantages of ceramic foam filters
  Use more 4-5 times than other CFF in case of Electrical heating 1.26Mpa compressive strength higher than other CFF 0.6-1MPa
  Usage
  1. Clean the filter box before using a ceramic foam filter
  2. Gently place the ceramic foam filters into the filter box slot and press the sealing around to prevent side flow.
  3. Uniformly preheat the filter box and CFF to make them close to the molten aluminum temperature
  4. preheated by electric or gas Under normal circumstances: 15-30min.
  5. make launder full of molten aluminum during...    less

  • July 18, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Process flow of porous ceramic filter

  porous ceramic filter meets high-quality standards and provides outstanding homogeneity.
  They are available in numerous pore sizes and are used in ceramic filters for all common metals, such as iron, stainless steel, and aluminum.
  In our role as a...  moreporous ceramic filter meets high-quality standards and provides outstanding homogeneity.
  They are available in numerous pore sizes and are used in ceramic filters for all common metals, such as iron, stainless steel, and aluminum.
  In our role as a leading manufacturer of porous ceramic filter we have a deep understanding of our customers’ needs as well as industrial requirements.
  With the highest quality standards, we ensure the extraordinary homogeneity of our filter foams and thus achieve maximum effectiveness for the final product.
  All of our products feature an exceptionally homogeneous foam structure and offer solid wetting and recovery properties.
  the porous ceramic filter effectively removes solid inclusions from molten metal, so aluminum alloy can be smoothly forged, aluminum foil and extrusion processes to obtain a perfect aluminum product.
  The product has a range of 20 PPI coarse pores to a very fine pore size of 60 PPI, so there will always be a product standard that suits your...    less

  • July 17, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Process flow of porous ceramic filter

  porous ceramic filter meets high-quality standards and provides outstanding homogeneity.
  They are available in numerous pore sizes and are used in ceramic filters for all common metals, such as iron, stainless steel, and aluminum.
  In our role as a...  moreporous ceramic filter meets high-quality standards and provides outstanding homogeneity.
  They are available in numerous pore sizes and are used in ceramic filters for all common metals, such as iron, stainless steel, and aluminum.
  In our role as a leading manufacturer of porous ceramic filter we have a deep understanding of our customers’ needs as well as industrial requirements.
  With the highest quality standards, we ensure the extraordinary homogeneity of our filter foams and thus achieve maximum effectiveness for the final product.
  All of our products feature an exceptionally homogeneous foam structure and offer solid wetting and recovery properties.
  the porous ceramic filter effectively removes solid inclusions from molten metal, so aluminum alloy can be smoothly forged, aluminum foil and extrusion processes to obtain a perfect aluminum product.
  The product has a range of 20 PPI coarse pores to a very fine pore size of 60 PPI, so there will always be a product standard that suits your...    less

  • July 17, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Types of Ceramic foam filters are conditioned in particular

  These Ceramic Foam filters are designed for mould-casting metal. Thanks to the mechanism of creation of the “filter cake” on the inlet filter side and thanks to depth filtration inside the ceramic matrix, these Ceramic Foam...  moreThese Ceramic Foam filters are designed for mould-casting metal. Thanks to the mechanism of creation of the “filter cake” on the inlet filter side and thanks to depth filtration inside the ceramic matrix, these Ceramic Foam filter are an effective instrument to reach metallurgical purity of molten metal during the process of casting. The filters also calm mould filling, thus preventing creation of undesirable defects in the casting.
   
  Ceramic Foam filter out Wholesale
   
  Ceramic foam filter size
  (26 inch)660x660x50
  (23 inch)584x584x50
  (20 inch)508x508x50
  (17 inch)432x432x50
  (15 inch)381x381x50
  (12 inch)305x305x50
  (9 inch)228x228x50
  (7 inch)178x178x50
   
  These filter features are conditioned by the open 3D structure of the ceramic matrix created by the system of mutually interconnected cells. They are characterised by a very good thermal conductivity, stability and resistance to sudden temperature changes.
  Types of Ceramic foam filters are...    less

  • July 17, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Singapore Ceramic foam filters Wholesale

  Ceramic Foam...  moreCeramic Foam filter Wholesale
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  CERAMIC FOAM filter out WHOLESALE
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  posted at 08:30h in Ceramic Foam filters by admin 0 remarks
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  0Likes
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Ceramic foam filter wholesale performs a very crucial role in enhancing the nice of aluminum alloy softening, which greatly influences the subsequent aluminum and aluminum alloy processing performance and the exceptional of the final product. therefore, all countries inside the world connect superb significance to the purification of aluminum soften.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  there are many motives for aluminum pollutants
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  On the one hand, at some stage in the melting system, aluminum is uncovered to the atmosphere inside the furnace in a molten or semi-melted country, which is straightforward to oxidize, without difficulty reacts with water vapor to soak up hydrogen, and is easy to shape numerous styles of non-metal slag (which includes lining fragments, chlorides, etc.) The flux of carbides, and so on.) and coarse...    less

  • July 15, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Filtration for molten metals by ceramic foam filters

  Filtration for molten metals by ceramic foam filters is one of the best method in order to remove the imputies from the metal liquid. This article develops a new approach for the production of ceramic foam filters. In the conventional method of...  moreFiltration for molten metals by ceramic foam filters is one of the best method in order to remove the imputies from the metal liquid. This article develops a new approach for the production of ceramic foam filters. In the conventional method of ceramic foam filter production, polyurethane sponges are used.
  The ceramic foam filter was produced by using the porous ceramic filter, in which the materials are zirconia, silicon carbide, or alumina. Ceramic foam filters are in a specially designed mold by steam by Adtech. Various ceramic slurries are then poured into the porous cell and allowed to air dry. After the shaping operation, filters are subjected to a sintering process under various conditions. By this new method, filter channel sizes can be controlled and traps with desired configurations can be formed. Some tests were applied to the produced filters. Thermal shock tests ensured that the filters could withstand temperatures of...    less

  • July 13, 2022
• 
  x l posted a topic in the forum News and Announcements:

  refining flux and coaching technique thereof

  The aluminum or aluminum alloy cleansing molten is dealt with refining flux and coaching technique thereof
  Technical areathe prevailing invention relates to the purifying treatment of aluminum or aluminum alloy melt, in particular relate to...  moreThe aluminum or aluminum alloy cleansing molten is dealt with refining flux and coaching technique thereof
  Technical areathe prevailing invention relates to the purifying treatment of aluminum or aluminum alloy melt, in particular relate to aluminum or aluminum alloy cleaning molten processing refining flux; This refining flux is relevant to that rare gasoline detail because the pouring-in aluminum or aluminum alloy cleaning molten processing of the winding-up of the provider.historical past technologyThe first-rate of aluminum or aluminum alloy foundry items is by means of the diploma of purification decision of soften. The goal of cleansing molten is gas and the nonmetal inclusion of doing away with as a whole lot as feasible within the melt, thereby reduces free, pore in the foundry goods, various metallurgical imperfections which include be mingled with, and improves the mechanical assets of foundry items, possibly creates situations for the following manner of the strand....    less

  • July 12, 2022
• 
  x l posted a topic in the forum News and Announcements:

  Ceramic foam filters clear-out specifications are categorized

  Ceramic foam filters clear-out specifications are categorized according to dimension and Pore size, and it could enhance the first-class of castings and obtain notable aluminum die...  moreCeramic foam filters clear-out specifications are categorized according to dimension and Pore size, and it could enhance the first-class of castings and obtain notable aluminum die castings.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Ceramic foam filters clear out size
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  660x660x50(26 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  584x584x50(23 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  508x508x50(20 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  432x432x50(17 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  381x381x50(15 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  305x305x50(12 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  228x228x50(9 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  178x178x50(7 inch)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Ceramic foam filter out Pore length (PPI): 10/20/30/forty/50/60
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Ceramic foam filters out specifications
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  the main characteristic of the filter out is to allow many aluminum melting and casting plants to put off impurities from the molten metallic.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  In Europe, most ceramic foam filters are used to reduce inclusions in liquid aluminum alloys. these excessive-grade ceramic foam filters for casting are mild in weight, excessive in power, and massive...    less

  • July 12, 2022