Updates

• 
  The Router Help wrote a new blog entry:

  Eero Support

  Are you looking to find the right Eero Support? Then, you can reach out to our website. We assist the users with the Eero router setups. From setting up your router to logging into the router admin account, we deliver it all. So, it would help if you reac...

  • December 2, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  What are the Manual Settings For ATT Email Using IMAP & SMTP?

  1.   First, open the email application on your preferred device. The application can be either Thunderbird or Outlook or any other relevant one.
  2.      Next, go to account settings and select “Add...  more1.   First, open the email application on your preferred device. The application can be either Thunderbird or Outlook or any other relevant one.
  2.      Next, go to account settings and select “Add Account”.
  3.      Thirdly, you will find a few email providers appearing on the screen. You must click on “Others”
  4.      In the username section that pops up, Enter your desired email address along with your password in the respective field.
  5.      Now go to “Manual Setup” and select on manual settings and enter them as described below-
   
  If you have questions or need any assistance troubleshooting, just visit: Att Net Pop Settings | att email problems  less

  • November 16, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  How can I fix the slow WiFi speed on my laptop?

  Boost your Wi-Fi signalPlace your laptop near the routerShut down programs or devices that consume large bandwidthRestart your device and routerUpdate driver softwareMake sure no energy saving settings are imposed on the wireless cardReset router...  moreBoost your Wi-Fi signalPlace your laptop near the routerShut down programs or devices that consume large bandwidthRestart your device and routerUpdate driver softwareMake sure no energy saving settings are imposed on the wireless cardReset router configuration to factory default
   
  If you have questions or need any assistance troubleshooting, just visit: Roadrunner Webmail Login | Spectrum Webmail Login  

  • November 11, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  How to update settings for AT&T email?

  Right click your AT&T email and select Properties.
  On the General tab:
  
  Verify your Name and Email...  moreRight click your AT&T email and select Properties.
  On the General tab:
  
  Verify your Name and Email address.
  Make sure Include this account when receiving mail or synchronizing is checked.
  
  
  Select the Servers tab:
  
  Confirm POP3 or IMAP displays for incoming mail server.
  Check that the Incoming Mail Server has the correct email address.
  Enter or paste your secure mail key in the Password field.
  Make sure Remember password is checked.
  
  
  
  If you have questions or need any assistance troubleshooting, just visit: Att.net Sign in | att email not working  less

  • November 10, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  Is it good to check internet connection?

  If you're installing your router as part of moving into a new home or apartment, it's all the more important to make sure  you have an active internet connection, since you are likely to be setting up your router alongside a newly installed or...  moreIf you're installing your router as part of moving into a new home or apartment, it's all the more important to make sure  you have an active internet connection, since you are likely to be setting up your router alongside a newly installed or activated internet service.
  To check internet status, simply connect to your modem or ISP gateway using an Ethernet cable, and plug it directly into your laptop or desktop PC. (If you don't have an Ethernet port on your laptop, you'll want to get an Ethernet adapter.) If your computer is getting an internet connection, you're in good shape to set up the router.
   
  If you have questions or need any assistance troubleshooting, just visit: Router Settings | Eero Help   less

  • September 13, 2021
• 
  The Router Help We can guide you with your Eero device. If you have any questions about the Eero configuration, visit our website. If you have successfully installed your Eero device, then you can proceed with the login. Also, you can get Eero Login steps on the...  moreWe can guide you with your Eero device. If you have any questions about the Eero configuration, visit our website. If you have successfully installed your Eero device, then you can proceed with the login. Also, you can get Eero Login steps on the website. For any further help with the login, you can also contact us.https://www.therouterhelp.com/eero-router-setup/  

  • July 11, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  Follow these steps:-

  1. Click the Windows button -> Settings -> Network & Internet.2. Select Wi-Fi.3. Slide Wi-Fi On, then available networks will be listed. Click Connect. Disable/Enable WiFi.
  If you have questions or need any assistance troubleshooting, just visit:...  more1. Click the Windows button -> Settings -> Network & Internet.2. Select Wi-Fi.3. Slide Wi-Fi On, then available networks will be listed. Click Connect. Disable/Enable WiFi.
  If you have questions or need any assistance troubleshooting, just visit: Belkin.Setup N300 | Eero Help  

  • June 25, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  Why is my WiFi so bad all of a sudden?

  If your speed test confirms your internet is slow, you should try connecting to multiple websites and using multiple devices in your home if your Internet connection is slow. If the slowness is just with one website, it’s probably that...  moreIf your speed test confirms your internet is slow, you should try connecting to multiple websites and using multiple devices in your home if your Internet connection is slow. If the slowness is just with one website, it’s probably that website’s problem—not your internet’s. There’s not really anything you can do about this except wait for the people in charge of the website to fix it. Narrowing down where the problem lies will help you fix it. Does the slowness just happen on one computer, or all your devices?
  If it’s just one computer, you know the solution probably lies there. You may just have to reboot the computer, or you may need to perform a malware scan with your preferred antivirus to check that everything is fine. If the slowness happens on multiple devices—multiple computers, for example, or your computer and your phone—then it’s almost certainly a network problem, and you’ll have to go to your router.
  If you have questions or need...    less

  • June 22, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  Is Eero a router or extender?

  Unlike the familiar router-to-range extender network configuration, eero is a WiFi system that uses multiple access points to provide your home with fast, reliable coverage all on a single network. Range extenders can expand the reach of your existing...  moreUnlike the familiar router-to-range extender network configuration, eero is a WiFi system that uses multiple access points to provide your home with fast, reliable coverage all on a single network. Range extenders can expand the reach of your existing wireless network.
   
  eero is designed to replace your current router with a WiFi system that provides greater Internet connection and reliability throughout your home. Most customers no longer need their older routers after installing eero. Some customers prefer to maintain their existing routers alongside their eero networks.
   
  If you have questions or need any assistance troubleshooting, just visit: Eero Update | Linksys Velop Setup
  
     less

  • June 20, 2021
• 
  The Router Help We assist in setting up your Belkin Router. Combined with the team of highly trained staff, we can help you with the Belkin Router setup. Why go anywhere when you have our help services at your doorstep. Get in touch with us: ...  moreWe assist in setting up your Belkin Router. Combined with the team of highly trained staff, we can help you with the Belkin Router setup. Why go anywhere when you have our help services at your doorstep. Get in touch with us: https://www.therouterhelp.com/belkin-router-setup/  

  

  • June 16, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  What does the Status Light of the Belkin F9K1015 indicate?

  This is located on top of the Belkin logo, which is in front of the Wi-Fi range extender. This shows the Wi-Fi range extender’s status. Below are the different status lights of the Belkin F9K1015.If Off – The Wi-Fi range extender is not...  moreThis is located on top of the Belkin logo, which is in front of the Wi-Fi range extender. This shows the Wi-Fi range extender’s status. Below are the different status lights of the Belkin F9K1015.If Off – The Wi-Fi range extender is not connected to a power source.If Blinking Blue – The Wi-Fi range extender is starting up.If Solid Blue – The Wi-Fi range extender is connected to the wireless network.If Blinking Orange – The Wi-Fi range extender is not connected to the wireless network.If Solid Orange – The Wi-Fi range extender is experiencing a weak signal.If Alternating Blue and Orange – The Wi-Fi range extender is ready to be set up.If you have questions or need any assistance troubleshooting, just visit: Belkin.Range Setup | Netgear Orbi Login
  
  
     less

  • June 10, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  How do you reset a Belkin wifi extender?

  Follow these steps:-
  1. Find the circular button marked “Reset” on the back of your Extender.2. Use a pin or paperclip and press the “Reset” button.3. Hold the “Reset” button down for 10-15 seconds & see all light...  moreFollow these steps:-
  1. Find the circular button marked “Reset” on the back of your Extender.2. Use a pin or paperclip and press the “Reset” button.3. Hold the “Reset” button down for 10-15 seconds & see all light flashing on the extender.4. Release the Reset button & Reboot the range extender.5. Wait for one minute for your range extender to fully Reboot and restore the factory setting.
  Now your range extender has been Fully Reset and Ready to be Configured & installed. If you have questions or need any assistance troubleshooting, just visit: Belkin N300 Setup | Google Wifi Update  less

  • May 26, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  Why isn't my Belkin Range Extender working?

  If the Belkin Setup is unable to communicate with your range extender during the installation process, make sure that it is powered ON. In case you are still unable to connect, reset your range extender. To do so, press and hold the reset button of...  moreIf the Belkin Setup is unable to communicate with your range extender during the installation process, make sure that it is powered ON. In case you are still unable to connect, reset your range extender. To do so, press and hold the reset button of your range extender for at least 10 seconds then release it.
  
  
  
   
  Launch a browser and enter "https://belkin.range" in the Address bar then tap Go. NOTE: You can also enter "https://192.168.206.1" in the Address bar to access the range extender's web-based setup page​. On the page that opens, tap on Get Started.
   
  To know more visit: Belkin Extender Setup | Google Home Wifi Setup
  
  
   
  
  
     less

  • May 17, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  How to Setup Belkin Extender ?

  The Easy Way is to install the Belkin extender Wirelessly using Laptop so Please Follow Steps Given Below-1. The Easy Way is to install the Belkin extender Wirelessly using Laptop so Please Follow Steps Given Below-2. Unbox & Plug the Belkin Range...  moreThe Easy Way is to install the Belkin extender Wirelessly using Laptop so Please Follow Steps Given Below-1. The Easy Way is to install the Belkin extender Wirelessly using Laptop so Please Follow Steps Given Below-2. Unbox & Plug the Belkin Range Extender to Power Outlet With In The Range of Your Main Router.3. Turn the Power On For Belkin Extender & Wait for a Minute so it can load Properly.4. Go to Your Laptop & Refresh the Available Network List on Laptop Or You Could Simply Restart the Laptop5. Find an Unsecured Network Name Similar to Belkin.setup (Please Check The Configuration Card Came With Extender)6. Please Connect with New Network (Belkin.setup) & Once Connected it Should Automatically Open your Default Browser & Take you to the Belkin Extender ConsoleIf you have questions or need any assistance troubleshooting, just visit: Belkin N600 Setup | Orbi Admin Login  less

  • May 13, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  How do I set up eero?

  Follow these steps:-
  STEP 1: Download the eero app for iOS or Android
  STEP 2: Create an eero account or Log In with your Amazon Account
  STEP 3: Set up your eero...  moreFollow these steps:-
  STEP 1: Download the eero app for iOS or Android
  STEP 2: Create an eero account or Log In with your Amazon Account
  STEP 3: Set up your eero Gateway
  STEP 4: Create your eero network
  STEP 5: Add eeros to your network
  Step 6: Connect devices to your eero network
  If you have questions or need any assistance troubleshooting, just visit: Eero Help | Setting Up Google Wifi  

  • May 9, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  Can you use more than 3 Google WIFI?

  Yes, if you need more, you can add more. There are diminishing returns on having more, though – at some point, they start interfering with each other more than helping provide more coverage, since there are only 3 2.4GHz channels to choose from,...  moreYes, if you need more, you can add more. There are diminishing returns on having more, though – at some point, they start interfering with each other more than helping provide more coverage, since there are only 3 2.4GHz channels to choose from, and all of the nodes have to be on one common 5GHz channel.
   
  If you have questions or need any assistance troubleshooting, just visit: Google Mesh Network | Orbi Admin Login  

  • April 27, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  How do I use my old Belkin router as a range extender?

  Follow these steps:
   
  
  Log in to the Belkin router’s web interface, as said in the previous...  moreFollow these steps:
   
  
  Log in to the Belkin router’s web interface, as said in the previous step.
  Now, click the Use as Access Point option under the Wireless section.
  In the right window, click the Enable option and then enter a static IP address for the Belkin router within the address range of the main router. Make sure the static IP you enter is not used by any other device on the network.
  Enter the Subnetmask as in the main router.
  Click the Apply Change button.
  Enabling the Access Point option would itself disable the router functionalities of the Belkin router.
  Now, connect your Belkin router to the main router using an Ethernet cable. Make sure to connect the LAN port of both the routers and not the Internet port. Now you successfully configure Belkin router as repeater.
  
   If you have questions or need any assistance troubleshooting, just visit: Belkin Wifi Extender Setup | Google Home Wifi Setup  less

  • April 26, 2021
• 
  The Router Help We furnish support for Belkin WiFi Extender, so if you are unable to find out steps pertaining to Belkin Wifi extender setup on the official Belkin website, then don’t worry. Just visit us - https://www.therouterhelp.com/belkin-router-setup/

  • April 20, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  My Sonos system isn’t working properly. How do I fix this?

  If you're using your Sonos in wired mode to use SonosNet (dedicated Sonos mesh network), we recommend having only 1 Sonos device connected over ethernet.
  DO NOT plug any Sonos players into eero units that are not the gateway as this could slow down the...  moreIf you're using your Sonos in wired mode to use SonosNet (dedicated Sonos mesh network), we recommend having only 1 Sonos device connected over ethernet.
  DO NOT plug any Sonos players into eero units that are not the gateway as this could slow down the communication between your Sonos devices.
  For larger systems, having a dedicated Ethernet switch exclusively for all Sonos devices is ideal. You may also want to disable WiFi on units that are on a rack (for example 10x Sonos Amps on an equipment rack), but make sure at least one hardwired unit (either on the rack or elsewhere) has WiFi on so additional units are able to connect via SonosNet.
  If Sonos devices are plugged into a managed switch, ensure that Spanning Tree Protocol (STP) is disabled on that switch.
  
  If you have questions or need any assistance troubleshooting, just visit: Eero Support | Google Wifi Help  less

  • April 14, 2021
• 
  The Router Help We provide the best and reliable support for all the issues pertaining to the Google Wifi Setup be it set up or any kind of modifications related to the existing setup. If you come across such problems, then just visit here - ...  moreWe provide the best and reliable support for all the issues pertaining to the Google Wifi Setup be it set up or any kind of modifications related to the existing setup. If you come across such problems, then just visit here - https://www.therouterhelp.com/google-wifi-setup/  

  

  • April 8, 2021
• 
  The Router Help We furnish support for Orbi router, so if your Orbi router isn’t working properly, then you need to check the hardware, whether all the wires and cables are connected properly or not. If they are, then you will have to check the web interface, for...  moreWe furnish support for Orbi router, so if your Orbi router isn’t working properly, then you need to check the hardware, whether all the wires and cables are connected properly or not. If they are, then you will have to check the web interface, for which, will have to do Orbi Router login. For details regarding it, you visit us here - https://www.therouterhelp.com/netgear-orbi-router-setup/  

  • April 5, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  What is Zigbee Smart Home Hub?

  Both eero 6 and eero Pro 6 feature a built-in Zigbee smart home hub, making it easy to connect compatible devices with Alexa. So you can control certain lights, locks, plugs, and more—without the need to buy separate smart home hubs for your...  moreBoth eero 6 and eero Pro 6 feature a built-in Zigbee smart home hub, making it easy to connect compatible devices with Alexa. So you can control certain lights, locks, plugs, and more—without the need to buy separate smart home hubs for your connected devices.  Your eero works to connect your Zigbee devices, so you can save cost (and space) with a single hub.
  How do I use eero’s built-in Zigbee smart home hub?
  In order to activate your built-in hub, you will need to link your eero and Amazon accounts inside of the eero app. Once linked, your smart home hub is enabled and you can start connecting compatible Zigbee devices with Alexa using the Alexa app or any Echo product using your eeros. You can control those Alexa-enabled devices with your voice and set up scenes and schedules to automate your home.
  If you have questions or need any assistance troubleshooting, just visit: Eero Wifi Setup or Linksyssmartwifi.com  less

  • April 1, 2021
• 
  The Router Help posted a topic in the forum News and Announcements:

  What if my eeros fail to update?

  If your user-initiated software update fails, you will receive an onscreen prompt that will ask you to attempt the update again. If your updates continue to fail, try power cycling your gateway eero by unplugging the power cable from the back of your...  moreIf your user-initiated software update fails, you will receive an onscreen prompt that will ask you to attempt the update again. If your updates continue to fail, try power cycling your gateway eero by unplugging the power cable from the back of your eero, waiting 30 seconds, and then plugging them back in. Once done, start the user-initiated software update over. If that doesn't resolve the issue, please contact:-
  Eero Wifi SetupGoogle Wifi Support
  
   
  
     

  • March 30, 2021
• 
  The Router Help We are offering the support and assistance for creating an account on Linksys router login page. If you have purchased the new Linksys router and want to configure it online from the web-interface page, then visit us to get the instant support by...  moreWe are offering the support and assistance for creating an account on Linksys router login page. If you have purchased the new Linksys router and want to configure it online from the web-interface page, then visit us to get the instant support by visiting us here: https://www.therouterhelp.com/linksys-velop-router-setup/  

  • March 23, 2021
• 
  The Router Help We cater to the issues befalling the Linksys Velop login. If you are not being able to login to the Linksys Velop setup page from the web browser, then there can be number of reasons behind the problem. No need to worry about that, just visit here: ...  moreWe cater to the issues befalling the Linksys Velop login. If you are not being able to login to the Linksys Velop setup page from the web browser, then there can be number of reasons behind the problem. No need to worry about that, just visit here: https://www.therouterhelp.com/linksys-velop-router-setup/  

  • March 22, 2021
• 
  The Router Help We offer support for Netgear Orbi, so if you are using this device, but are not able to access the internet properly as of late, then you should check whether Orbi setup has been done properly or not. If not, then you should get in touch with experts....  moreWe offer support for Netgear Orbi, so if you are using this device, but are not able to access the internet properly as of late, then you should check whether Orbi setup has been done properly or not. If not, then you should get in touch with experts. For that, you can visit us: https://www.therouterhelp.com/netgear-orbi-router-setup/  

  • March 19, 2021
• 
  The Router Help We have a team of experts who will assist you regarding Eero Wifi Setup. To surf the web in an uninterrupted manner, you must Eero Login properly. We can walk you through the setup process in the most suitable way, which will help you access the device...  moreWe have a team of experts who will assist you regarding Eero Wifi Setup. To surf the web in an uninterrupted manner, you must Eero Login properly. We can walk you through the setup process in the most suitable way, which will help you access the device without any issue. For better details, visit us: https://www.therouterhelp.com/eero-router-setup/  

  • March 17, 2021
• 
  The Router Help has just signed up. Say hello!

  • March 16, 2021