What's New

• 
  fitting tony wrote a new blog entry:

  Purchase Skills of Pe Fittings Provided By Plastic Fittings Fac

  When purchasing Pe Fittings, plastic fittings factory suggests you to choose the pressure degree according to the current tap water pressure, generally 1.6MPA, 2.0MPA, Pe fittings pipe wall thickness is 2.3, 2.8, 3.5, 4.4MM, etc., not the higher the pr...

  • February 2, 2021
• 
  fitting tony wrote a new blog entry:

  You Should Know How to Install PP Compression Fitting

   
  The pp compression fitting is user-friendly, easy to install and have many purposes. These fittings aren’t normally used in new constructions but renovation projects. The pp compression fitting are ingenious because you can use them in place...

  • January 26, 2021
• 
  fitting tony wrote a new blog entry:

  Plastic Fitting Introduced By Plastic Fittings Factory

  Corrosion resistant — A plastic plumbing system pipe introduced by plastic fittings factory isn’t easily corroded by exposure to water and common household chemicals. Plastic formulas can be adjusted to allow them to stand up to the demands of...

  • January 19, 2021
• 
  fitting tony wrote a new blog entry:

  PP Compression Fitting Is A Good Product

   
  Why Compression?The ability to unscrew and remove the fitting with ease makes it ideal for areas where it may be necessary to occasionally strip down; waste pipes are the prime example – particularly where there is a water trap fitted to the...

  • January 12, 2021
• 
  fitting tony wrote a new blog entry:

  Know How to PP Compression Fitting

   
  There are various ways pp compression fitting are used. tHE pp compression fitting is required in both plumbing and electrical conduit systems to join pipework or tubing together. They are also used in toilet stop valves and hot and cold water tap...

  • December 7, 2020
• 
  fitting tony wrote a new blog entry:

  Choose the Right Spoce For Pe Fitting

   
  The minimum spacing of the national standard pp fitting is 100mm. However, the maximum distance should not exceed 300mm. The distance is too small, the coil is difficult and the construction is not smooth, and the distance is too large to meet the...

  • November 30, 2020
• 
  fitting tony wrote a new blog entry:

  What Is The Future of PP Compression Fitting?

   
  The pp compression fitting is the general term for components in the piping system that function as connection, control, direction change, split, seal, and support. According to the coupling method, it can be divided into four types: socket type p...

  • November 23, 2020
• 
  fitting tony wrote a new blog entry:

  You Need to Know How PP Compression Fitting Works

   
  In small sizes, the pp compression fitting is composed of an outer compression nut and an inner compression ring or ferrule (sometimes referred to as an "olive") that is typically made of brass or copper. Ferrules vary in shape and material but ar...

  • November 9, 2020
• 
  fitting tony wrote a new blog entry:

  Know China Saddle Clamp Features

   
  Strong and durable, the fixed wire part is completely wrapped with a plastic protective layer to protect the surface of the fixed wire. Good flexibility, shiny surface, chemical resistance. High strength, strong impact resistance performance. Wate...

  • November 2, 2020
• 
  fitting tony wrote a new blog entry:

  The Method to Install a Tube into PP Compression Valve

   
  Pe fitting body, lock nut, pipe clamp and V-shaped sealing ring make up our pp compression valve. When we use it, the nut and pipe clamp shall be put on the pipe in turn, and the pipe shall be inserted into the pipe body 4-5cm through the V-shaped...

  • October 26, 2020
• 
  fitting tony wrote a new blog entry:

  Know More About Mechnical PP Compression Fitting

   
  Mechanical pp compression fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce alignment. There are several materials of compression fittings, such as: Steel...

  • October 19, 2020
• 
  fitting tony wrote a new blog entry:

  Know What PP Compression Fitting Is

   
  The pp compression fitting is one of the most common and versatile methods of connecting metal or hard plastic tubing. Particularly useful for their extreme temperature and pressure capabilities, and their compatibility with aggressive fluids, pp ...

  • October 12, 2020
• 
  fitting tony wrote a new blog entry:

  Know Importance of PP Compression Fitting

   
  Why They’re Needed
  The pp compression fitting is used to join copper piping together for water and gas systems that provide a watertight seal between two pipes or a pipe. Consisting of three parts, (fitting nut, olive and a coupling/valve) ...

  • September 28, 2020
• 
  fitting tony wrote a new blog entry:

  You Need to Know Features of PP Quick Connect Fitting

   
   
  This series of pp quick connect fitting is a device that is widely used in oil, gas and general corrosive medium pipeline systems to realize quick connection. It is made of various high-quality materials as a whole, with beautiful appearan...

  • September 21, 2020
• 
  fitting tony wrote a new blog entry:

  Know Product Features of PP Compression Fitting

   
  The pp compression fitting is novel in structure and easy to install and use, especially in pipeline maintenance.
  pp compression fitting is composed of pipe fitting body, lock nut, pipe clamp and V-shaped sealing ring. When using, the nut and pip...

  • September 14, 2020
• 
  fitting tony wrote a new blog entry:

  What Are Necessary Components Of Brass PP Fitting?

   
  Brass pp fitting make use of a number of components. What are these components? Read on to know:
  1.Coupling: Couplings are the components that are used to connect two pipes. You can get these components in different lengths and sizes.2.Nipple: Ni...

  • September 7, 2020
• 
  fitting tony wrote a new blog entry:

  What is the Difference between a Male and a Demale Quick Connec

   
  The only thing that separates a male quick connect fitting from a female fitting is where the fitting thread is located. On a male fitting, the thread is located on the outside, and on a female fitting, it is located on the inside.
  The water tre...

  • August 31, 2020
• 
  fitting tony wrote a new blog entry:

  You Need To Choose the Right Type Of PP Compression Valve

   
  Wherever there are liquids there are leaks – it’s inevitable. Leaks, of course cost money in downtime and repair of industrial cleaning systems. So, you ask, what is the best defense against leaks.
  Most leaks occur where one piece of ...

  • August 24, 2020
• 
  fitting tony wrote a new blog entry:

  You Need To Know That Stainless PP Fitting Is Sturdy and Durabl

   
  　Most piping systems that are used in various industrial, residential, and commercial applications today are usually installed out of sight. This means that the pipes are either placed in the ground or behind walls and concrete structures.
  　　Repa...

  • August 17, 2020
• 
  fitting tony wrote a new blog entry:

  Know Advantages Of PP Compression Valve

   
  Though the simplest of pp compression valve, the standard fitting does its job perfectly well. When all that is required is the joining of tow lengths of pipe, a standard compression fitting is totally suitable. There is no advantage in making th...

  • August 10, 2020
• 
  fitting tony wrote a new blog entry:

  Try These Essential Pe Fitting Tools

   
  Did you know that thousands of dollars in labor are lost every year by companies that continue to use outdated pe fitting and alignment methods? If you want your welding company to maintain a competitive edge, it is important to keep up with the l...

  • August 4, 2020
• 
  fitting tony wrote a new blog entry:

  Helpful Ways of Finding the Stainless-steel PP Fitting Supplier

   
  The stainless-steel pp fitting and pipes are integral to the operations in industrial settings. They can control and manipulate the flow of gases and fluids through the pipes. Most importantly, these components ensure the safety and enhanced produ...

  • August 4, 2020
• 
  fitting tony wrote a new blog entry:

  You Can Try Quick Connect Fitting

   
  We are a well-renowned and reputed company which primarily focuses on providing customers with products of high quality and flawless precision. We undertake the manufacture of a large variety of high-quality quick connect fitting. The wide portfol...

  • July 27, 2020
• 
  fitting tony wrote a new blog entry:

  We Introduce Two Different Kinds Of Pvc Ball Valve

  Compact PVC Ball ValvesCompact pvc ball valve is constructed using the molded-in-place method defined in our construction methods blog. Using this unique method, molding the plastic around the ball and stem assembly, provides multiple benefits. A full por...

  • July 24, 2020
• 
  fitting tony wrote a new blog entry:

  We Give You The Way Of Finding PP Compression Fitting Supplier

   
  The pp compression fitting IS integral to the operations in industrial settings. They can control and manipulate the flow of gases and fluids through the pipes. Most importantly, these components ensure the safety and enhanced productivity of your...

  • July 21, 2020
• 
  fitting tony wrote a new blog entry:

  You Should Know How To Clean Custom Curtain Rods

   
  Many folks often neglect their Custom Curtain rod when cleaning their house simply because they don’t look that dirty. However, it’s been proven that drapes actually hold a lot of dust and grime that can seriously affect the quality of...

  • July 14, 2020
• 
  fitting tony wrote a new blog entry:

  Whether We Can Use Quick-connect Fittings With Gas and Air

   
  The quick fitting, also known as quick-connect couplings, have made water treatment faster and more efficient than ever before. However, if they aren't installed correctly, they can present issues to your water filtration systems. That's why it is...

  • June 29, 2020
• 
  fitting tony wrote a new blog entry:

  What Is The Reason To Choose Quick Connect Fitting?

   
  Have you ever used a piece of equipment with a quick connect fitting? Sometimes they are also called quick connect connectors or couplings. If you have used them at some point you know how convenient, effective and noteworthy they are for many app...

  • June 22, 2020
• 
  fitting tony wrote a new blog entry:

  Pay Attention To Common PP Quick Connect Fitting Failures

   
  The pp quick connect fitting is man made mechanisms and are prone to failure at any point in time. However, this doesn’t necessarily mean that failure cannot be avoided. One of the primary reasons behind tube fitting failure is corrosion. Wh...

  • June 15, 2020
• 
  fitting tony wrote a new blog entry:

  Installation Of PP Compression Fitting

   
  Installation instructions for pp compression fitting vary depending on the manufacturer and the specific fitting design. Care should be taken to follow the assembly procedures recommended by the manufacturer. There are however, several common elem...

  • June 9, 2020
• 
  fitting tony wrote a new blog entry:

  Pay Attention To These Things Of PP Compression Fitting

   
  Installation instructions for pp compression fitting vary depending on the manufacturer and the specific fitting design. Care should be taken to follow the assembly procedures recommended by the manufacturer. There are however, several common elem...

  • June 9, 2020
• 
  fitting tony wrote a new blog entry:

  Advantages of Standard PP Compression Fittings

   
  Though the simplest of pp compression fitting, the standard fitting does its job perfectly well. When all that is required is the joining of tow lengths of pipe, a standard pp compression fitting is totally suitable. There is no advantage in makin...

  • June 2, 2020
• 
  fitting tony wrote a new blog entry:

  What Are Product Features Of PP Compression Fitting?

   
  1. pp compression fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and wa...

  • June 2, 2020
• 
  fitting tony wrote a new blog entry:

  How To Install PP Compression Fitting?

   
  1Hold the center nut of a pp compression fitting with an adjustable wrench. Turn one of the two outer locking nuts counterclockwise with a second adjustable wrench. Turn the wrench until the outer locking nut is loose but do not take apart the fit...

  • May 26, 2020
• 
  fitting tony wrote a new blog entry:

  What Are Advantages Of PP Clamp?

   
  One of the main advantages of a PP clamp is that it is quick acting, you just need to apply the handle and that immediately applies the load and secures the component in place. In some instances you could use something like a strap clamp which are...

  • May 26, 2020
• 
  fitting tony wrote a new blog entry:

  Why Not Learn The Way Of Install PP Compression Fitting?

   
  Step 1 Cut the Pipe Cut the end of the pipe, if necessary, using a tubing cutter. Open the jaws of the tubing cutter and fit it onto the pipe so the pipe rests squarely against the two flat rollers of the cutter. Tighten the cutter so the cutting ...

  • May 19, 2020
• 
  fitting tony wrote a new blog entry:

  Types of Plastic Ball Valve

   
  First, we will take a look at a few different types of plastic ball valve. Some are easier to clean than others, with a variety of body types available.
  One-Piece PVC Ball ValveThis is the most common type of PVC ball valve, with a one-piece body...

  • May 12, 2020
• 
  fitting tony wrote a new blog entry:

  Know The Advantages Of PP Compression Fitting

   
  The pp compression fitting is novel in structure and easy to install and use, especially in pipeline maintenance.
  pp compression fitting is composed of pipe fitting body, lock nut, pipe clamp and V-shaped sealing ring. When using, the nut and pip...

  • May 12, 2020
• 
  fitting tony wrote a new blog entry:

  Why Choose PP Compression Fitting?

   
  The pp compression fitting is composed of the pipe fitting body, lock nut, pipe clamp and V-shaped sealing ring. When using, the nut and pipe clamp shall be put on the pipe in turn, and the pipe shall be inserted into the pipe body 4-5cm through t...

  • April 28, 2020
• 
  fitting tony wrote a new blog entry:

  Installation Tips Of Push-fit Fitting

   
  Fully inserting pipe into push fit fitting is key to a successful installation. The depth to which it's inserted is specified by the manufacturer and varies by pipe size. SharkBite makes a handy depth gauge (plus deburring tool) for their fittings...

  • April 28, 2020
• 
  fitting tony wrote a new blog entry:

  Know The Differences Between Gate Valves and Plastic Ball Valve

   
  One of the most important components of a functional plumbing system is the valves it contains. Valves allow for the start and stop of the flow of liquid, and they need to work well to prevent leaks and unwanted flow. While there are a number of v...

  • April 21, 2020
• 
  fitting tony wrote a new blog entry:

  What Are Disadvantages of Plastic Ball Valve?

   
  The major drawbacks of plastic ball valve are mentioned below:
  Unsuitable for Long Duration Throttling:A big drawback of a ball valve is that it is not a great choice for throttling for a long time. This is mainly true for the fast-flowing liquid...

  • April 21, 2020
• 
  fitting tony wrote a new blog entry:

  Why Should We Choose Plastic Ball Valve?

   
  The plastic ball valve are designed to be used in a variety of applications and markets, but a V-port ball valve offers the added ability to be used as a control valve where necessary. The main differentiator is a contoured V-port in the ball, mos...

  • April 14, 2020
• 
  fitting tony wrote a new blog entry:

  Why Do We Advise You To Choose PP Fitting?

  Have you ever used a piece of equipment with a pp fitting? Sometimes they are also called quick disconnect connectors or couplings. If you have used them at some point you know how convenient, effective and noteworthy they are for many applications. If yo...

  • April 7, 2020
• 
  fitting tony wrote a new blog entry:

  What Is A Plastic Ball Valve?

   
  What is a plastic ball valve? It's a question new customers often ask us at Valtorc, so let's look into this to answer the question and explain what a plastic ball valve is.
  A plastic ball valve is described as a mechanical device that directs, ...

  • March 31, 2020
• 
  fitting tony wrote a new blog entry:

  What Are the Advantages of Using Trunnion Plastic Ball Valves?

  Trunnion mounted plastic ball valve is very popular in the piping industry. That is because they can handle different kinds of applications and mediums including liquid, gasses, and slurries. Here are some of the most favorable advantages of using trunni...

  • March 24, 2020
• 
  fitting tony wrote a new blog entry:

  Some Benefits For Plastic Ball Valves

  I was recently tasked with determining which ball valve should be used to replace old ones in a barn. After looking at the different material options and knowing that they would connect to PVC pipe, there was no doubt I was looking for a PVC ball valve.
  ...

  • March 17, 2020
• 
  fitting tony wrote a new blog entry:

  It Is Important To Know How To Clean Plastic Ball Valve

   
  Cleaning a plastic ball valve is a very important step in maintaining a piping system, especially one that requires high purity. Two examples of high purity applications are chemical processing and brewing. Regardless of application, you should c...

  • March 17, 2020
• 
  fitting tony wrote a new blog entry:

  Plastic Ball Valve Works As Such

   
  Understand plastic ball valve in swimming pool systems.
  The plastic ball valve is a very common type of valve. It is found in many different applications including some swimming pool systems. While pool professionals prefer the Jandy valve, this ...

  • March 10, 2020
• 
  fitting tony wrote a new blog entry:

  What Advantages Does Plastic Ball Valve Have?

   
  Some of the biggest benefits of plastic ball valve are given below:
  Convenient Usage:Unlike other types of valves, ball valves are the most convenient in usage because of their simple mechanism. Due to the small size and lightweight of the ball v...

  • March 3, 2020