Other Variants of Pot Magnet
-
Different installation options
Pot magnets can be used for various mounting options, such as for tightening. For this, there is a continuous cylinder bore with an internal thread in the middle. If there are other countersunk head screws, nothing will protrude when using a suitable countersunk head screw. Magnets with discontinuous threaded bushes on the back are screwed onto pins with external threads. There are also types with threaded pins for screwing into sockets. If you do not have these mounting options, you can also paste the magnet into the appropriate opening. Different versions of the product have hooks or perforations on the non-adhesive side, which can be easily and flexibly hooked on the metal surface.
The material of the magnetic core
The magnetic force depends on the material of the magnetic core. The cheapest but also the weakest are ferrite magnets. It is sturdy and durable and can also be used outdoors. Neodymium magnets and SmCo magnets are considered high-energy magnets. They are usually used where very small size and high adhesion are required. Both variants are rare earth alloys. Mar cobalt magnets can be used at very high and very low temperatures and are more corrosion resistant than neodymium magnets. Due to the limited availability of its raw materials, it is also more expensive. The neodymium iron boron magnet is not fragile. Certain safety precautions need to be followed when handling high-energy magnets.
Other variants and accessories of pot magnets
The magnetic core is in a steel pot or a stainless steel pot. The adhesion of steel is slightly higher. Stainless steel is rust-proof, so it is also suitable for outdoor use. Further variants arise from the type of manufacture of the housing, such as a rotating or pressed housing. Thanks to the more complicated rotation, the pot can be manufactured more precisely. Rubber gaskets and covers can also be used as accessories for pot magnets. These can protect sensitive surfaces from scratches.
Pot magnets are also called deep pot magnets, fabricated magnets, fastening magnets or clamping magnets. The magnetic core is integrated into the round steel pot. The resulting magnetic short circuit will increase the magnetic flux, thereby increasing the adhesion. Because this very low design can be achieved, the name of the magnet is a deep pot magnet.
The pot-shaped magnet is easy to fix and can be firmly fixed for lifting or grasping. It is not only an ideal and detachable connection method in metal, factories, exhibitions or shop buildings. Deep pot magnets are ideal for attaching objects firmly to metal surfaces. The pot-shaped magnet has a neodymium and ferrite core, a threaded bushing, a countersunk or cylindrical hole or an external thread. As the same pot magnet on the non-metal surface, it can also be obtained on the metal disc to the screw and metal disc glue.
Ningbo Tengxiao Magnetic Industry Co., Ltd. is not only a Pot Magnet Manufacturer but also a Magnetic Name Badget Manufacturer, welcome to visit our official website.