The main reasons for reliability testing of USB 3.0 connectors

  • Must test USB3.0 connectors according to the relevant quality processes during the design process.


    Among them, reliability testing is the critical design process for USB 3.0 connectors.


    This article mainly details the main reasons for the reliability testing of USB3.0 connectors. Let's learn more about it!



    USB3.0 connector reliability testing is mainly the following aspects:

    • Determining the time interval between failures

    • The samples involved

    • Variable measurements

    • Long duration (4000 hours or more) and test environment compared to specific long-term failure mechanisms

    • Long execution time

    • High cost


    As a result, by the time reliability testing of USB 3.0 connectors is complete, the MTBF established is for a specific batch of test samples and may not account for the full range of tolerances of the products involved.


    Since the market is often unpredictable, the speed at which products come off the shelves is directly proportional to how they hit them. As a result, performance testing procedures have replaced this type of testing.




    The primary purpose of USB 3.0 connector reliability testing is to check if the performance and quality of the connector can meet the application requirements.


    The primary purpose is to avoid undesirable problems with USB3.0 connectors during use. Therefore, it is a crucial point of high-quality USB3.0 connector design.