Hose Fittings Suppliers Introduces The Installation Requirement

• Posted by cnshunda yuyao May 22, 2022 - Filed in Business - #Hose Fittings  - 797 views

   

  Hose Fittings Suppliers introduces the installation guide of water pipe adapters:

  When installing water pipe adapters, pay attention to using suitable raw materials. It is best to first ask about the usefulness and advantages of various types of water pipe joints.

  The second is to pay attention to the installation position of the water pipe conversion joints. The water pipes buried in the wall must not have joints. It is best to close the water valve first when converting the water pipe, and then open it for testing.

  So what should we do if the water pipe adapter leaks? The leakage of the water pipe adapter is different from the leakage of other parts of the water pipe, which usually cannot be repaired, and can only be replaced with a new water pipe adapter.

  Remove the original connector first. If it is difficult to remove due to rust, you can use a hacksaw, cut a cut without touching the wire teeth of the water pipe, and then use a pipe wrench to unscrew it. If the rubber pad is old or missing, you need to replace it with a new one, apply a thick layer of white paint on the wire mouth, wrap it with hemp silk (or raw material tape) and then install it.

  Through the above introduction, Hydraulic Fittings Suppliers hopes that you can simply refer to the content of this article in future use.