What Causes The Lack of Wash Down Closet Impulse?
-
Wash down closet is not strong enough to flush water, a trick to make it surging, many people still don’t know. Let's take a look.
The toilet is an inconspicuous item in the family. Although the price is not very expensive, it is used many times and its status is also very important. If the toilet at home is broken, wouldn't it be a bad thing. However, after using the toilet at home for a long time, you will find that its momentum is getting weaker and weaker. Then, what is the cause of this situation? How to solve it?
The living conditions are getting better and better now, so everyone is getting used to the enjoyment. Most people have toilets installed in their homes. They are still very good at the beginning, and the flushing is also very clean, but as long as they are used for a long time, There will be a situation where the flushing is weak, and the flushing flow is not strong, at this time it is very embarrassing. So how to solve it? Today I will teach you a few practical tricks to help you solve the problem of not flushing the toilet, and let you go to the toilet at ease.
First of all, we have to figure out what causes the lack of toilet flush?
(1) The toilet flushing power is insufficient, which may be related to the water pressure, so you only need to increase the water level. We can take out the water inlet valve, remove the water inlet valve buckle, turn the water inlet valve body counterclockwise, and then increase the height of the body accordingly, and finally rotate the water inlet valve body clockwise and install the buckle on the water inlet valve. Install it, connect the filter and the water inlet pipe, and you can fix this problem.
(2) If the toilet is slightly blocked, it may also affect the flushing effect of the toilet. Dirt accumulated in the toilet tank or the ceramic glaze of the toilet is not smooth, which will cause the flushing to be weak. Dirt at the toilet outlet can easily breed bacteria, so keep it clean. When we clean the toilet, we must not use excessively corrosive cleaners, otherwise it will damage the ceramic glaze, and it will be easier to stain in the future. The outside of the base is the place where dirt and dirt are hidden. When cleaning, first lift the toilet seat, and then wash it with a professional toilet cleaner, so that the toilet will quickly become like a new one.
(3) Insufficient water pressure in the toilet will also result in insufficient toilet flushing, and the toilet will not be flushed after using the toilet. At this time, just put a mineral water bottle filled with water in the water tank, so that the weight of the mineral water can increase the water pressure and flush. It will also be more powerful when it is watered, and there will be no flushing.
(4) After going to the toilet, I found that the flushing force is not strong enough. One of the most important problems is that the toilet tank has a problem. We can remove the water inlet valve of the flush bucket, check and adjust, and then adjust the filter. Cleaning, usually after a long time, the filter will become clogged, and after cleaning, we need to add a toilet cleaner to prevent these problems, and it can also be automatically cleaned.
For more information about bathroom ceramic sanitary wares products, please continue to pay attention to us.