What is a syringe barrel mould?
-
The syringe mould includes a fixed-side take-and-attach plate, a movable-side take-and-attach plate, a positioning ring and a gate sleeve. The mould opening rod bolts are threadedly connected with the movable side mould opening rod, the movable side mould opening rod is movably installed in the hole of the movable side push plate, and the movable side limit rod bolt is screwed on the movable side take-up board There is a movable side limit rod, and the movable side limit rod is movably penetrated in the hole of the movable side push plate. The utility model produces a syringe barrel, the mould structure is simple, the circulating water is cooled evenly, the molding cycle is short, and the production efficiency is high.
The syringe structure of the disposable syringe includes a hollow cylinder. The inner wall of the hollow cylinder is provided with an annular groove matching the upper limit step of the push rod on the inner wall of the proximal end. The convex ring constitutes the groove wall, and the height of the back convex ring is greater than the front convex ring by 0.25mm～0.35mm. Through the height difference between the front and back convex rings, this product makes the push rod not easy to be pulled out without damaging the hollow cylinder after use, ensuring the safety of the “one-time” use of the syringe and helping to prevent cross-infection.
The specifications of disposable syringes are measured by scales. There are scales on the surface of the syringes, which are used to mark the amount. So what are the specifications?
Disposable syringe specifications:
1, 1ml, 2ml, 3ml
2, 5ml, 10ml
3. 20ml, 30ml
4. 50ml, 60ml
5.100ml
Disposable syringes can also be used to store liquid medicines, and can also be used to draw blood, and can also be used to add auxiliary liquid medicines to the infusion set.
Yuhuan Shengjiu Mould Co.,Ltd is a manufacturer and wholesaler of medical mould with a long history, please feel free to contact us if you need it.