Forums » News and Announcements

Introduction to the characteristics of aluminum casting flux

  • x l
    • 227 posts
    August 12, 2022 1:58 AM EDT

    The aluminum casting flux is a yellow, water-soluble flux used for welding and auxiliary welding of aluminum products in a molten bath. This flux increases the surface tension of aluminum and reduces the melting point so the molten metal remains fluid, allowing for easier pouring and pumping.

    aluminum casting flux is a product used in the welding of aluminum, it is non-toxic, non-corrosive, and has a high melting point.

    aluminum casting flux fine dissolving powder is the main raw material of aluminum spray. It is produced by special technology. The main component is acid salts, which have good corrosion resistance and metal cleaning ability.

    This is a product of aluminum metal casting. It is used to weld aluminum alloy and cast aluminum material, it has very high welding performance and is easy to use.

    It is used for casting aluminum products, and auxiliary welding of aluminum products.

    Flux is a chemical substance that decreases the melting temperature of certain metals, thus allowing them to be fused together more easily. In this case, it will allow you to weld aluminum products

    Flux is used by professionals and hobbyists to improve the quality of the welded product.

    The product is used in aluminum melting and pouring. It is also used as an assistant for welding to form a layer of aluminum oxide to protect the weld area.

    Flux for aluminum, auxiliary welding of aluminum products. Mixing ratio: about 1 to 3. The flux can be used in all kinds of methods, including the electrodes with wires and with wire-rod electrodes, as well as open arc and resistance welding. Suitable for industrial production and repair work!

    Auxiliary welding of aluminum products.

    Fluxes for the casting of aluminum alloys are designed to ensure proper wetting and improve the separation of oxides from the molten metal surface. It is used as an auxiliary ingredient when welding aluminum products.

    Aluminum casting flux is a white, powdery liquid additive used to help with the welding of aluminum. Aluminum casting flux is typically used during the welding process as an ingredient in a flux cored wire electrode, which helps to increase the strength of the weld joint as it cools.

    The flux is designed for auxiliary welding of aluminum and its alloys, particularly in the automotive industry. It has excellent cleaning properties and does not leave residue in the weld seam.

    Aluminum is mainly used as a casting material and most of the time the product needs to be welded when it gets produced. Flux can be used to make the welding easier but not properly using the right flux will affect the quality of your aluminum work

    The aluminum contains a built-in, non-soluble flux that is absorbed when melted, resulting in smooth casting surfaces. The product is ready to use and requires no additional preparation and cleaning.

    It's an auxiliary material for welding and aluminum products, which can remove oxides from the surface of the molten steel, facilitate molten metal flow, and increase the bond strength of the weld.