Ways to buy PVC coated fabrics


    It is usually recommended to dry clean pvc coated fabric, but it can be washed with cold or warm water and mild detergent. Remember not to machine wash PVC coated fabrics. Use a spray bottle or non-abrasive tool to apply the cleaning solution. If this is not enough to clean the PVC-coated fabric, you can gently clean it with a soft brush. Leave the cleaning solution on the fabric for a few minutes, and then wipe it dry with a dry cloth or sponge. Avoid using strong cleaning solvents such as acetone, ether, gasoline, kerosene and benzene. Also avoid the use of strong oxidants and strong acid products.

    Before storing, make sure that the PVC coated fabric is completely dry. Try to put it in a dry place with a temperature of 10 to 30 degrees Celsius. Lower temperatures will harden the material, causing wrinkles and even cracks. Higher temperatures can make the material sticky and may cause the coating to peel off. When stored, rolling is better than folding and bending. Recommended indoor or weatherproof outdoor areas.

    Another point is that PVC coated fabrics should not be ironed, as the heat may cause the coating to melt. Instead, try to press the seams with your fingers. It may be helpful to use Teflon presser feet to avoid fabric sticking. You can also use matte tape on the bottom of the normal presser foot. The polyethylene coating prevents the fabric from fraying, so you don't have to trim the edges.

    Hangzhou Xiaoshan Zhengda Textile Co., Ltd. manufactures PVC coated fabrics. If you have any questions, you can contact us: pvc coated fabric.