The Role of Wholesale Mist Sprayer Pumps Factory

• Posted by sprayerfactory zjg November 18, 2021 - Filed in Technology - #Wholesale Mist Sprayer Pumps Factory  #Wholesale Mist Sprayer Pumps Factory Suppliers  #Wholesale Mist Sprayer Pumps Factory Manufacturers  - 452 views

   

  Components of sprayers from Wholesale Mist Sprayer Pumps Factory
  These are the components that allow the fine mist sprayer to turn a liquid stream into a mist:

  Dust cap
  The cap is usually made of transparent PP plastic and is used as a dust cover and safety cap to prevent accidental dispensing of products by the actuator.

  Actuator
  This is what you push down to dispense the product, and unlike the lotion pump actuator, it has internal components to create a specific atomization pattern of the product. The consumer pushes down to spray the product from the bottle. Some actuators also have a locking function to prevent accidental assignment.

  insert
  This tiny part is where the liquid flows to create a mist-like pattern and is installed on the outside of the actuator. This is where the product leaves the sprayer.

  closure
  The cap holds the entire assembly together and secures it to the bottle. It is usually made of PP plastic and has many different finishes and design options, including but not limited to a metal case.

  Gasket
  This is why the cap is sealed on the bottle to prevent leakage. Different products and chemical compositions require different material choices, so this is the most important part of testing to ensure compatibility.

  mechanism
  The mechanism actually combines many different components into one, including pistons, valve stems, seals, springs, and housing covers. This is why the product is transferred from the bottle to the actuator. Depressing the actuator pulls the product up from the dip tube, through the piston towards the actuator, and from there through the insert.

  Dip tube
  This is the long plastic tube that enters the sprayer from the bottom of the bottle. Unlike the thicker lotion pump dip tube, the sprayer dip tube is thinner, usually slightly curved to reach the bottom so that all the contents of the product can be dispensed.

  For more product-related information, please click: Cosmetic Packaging Factory