Type Of 2" Ratchet Buckle


    How to use 2" ratchet buckle
    Hook type tensioner: Two hooks are hooked on the base respectively, and the webbing needs to be fixed across the country. Open the tensioner hardware, the webbing passes through the middle and then passes back through the middle rotating shaft. Pre-tightened webbing. Swing the handle back and forth to tighten the webbing, and the fixation is complete. The following steps are the method of loosening the tensioner. Pinch the fuse of the handle, open the tensioner hardware to the maximum, and the rotating shaft will automatically loosen. Pull out the webbing and loosen the tensioner to complete
    Without hook type tensioner, the webbing will wrap the base and the product to be fixed in a circle. The following steps are the same as the hook type.

    Precautions for 1" ratchet buckle use:
    1. Only use undamaged strapping, the label can clearly indicate the ability.
    2. When using, please try to keep the fabric away from sharp edges and corners to avoid abrasion or cutting.
    3. Avoid twisting and twisting the tensioner.
    4. Can not be overloaded.
    5. Do not use the webbing with knots.
    6. Do not place objects on the tensioner to avoid injury.
    7. Do not use the tensioner as a load lifting adjustment.