Forums » News and Announcements

Back To Topics

SMT mounter Feeder common types & classification

  • freeamfva jack
    • 1695 posts
     
    December 6, 2023 1:52 AM EST

    SMT mounter Feeder common types & classification

    Today, KINGSUN shares with you the common types and classifications of SMT mounters.Get more news about Reflow Oven,you can vist our website!

    一、According to the feeding method, common ones include:

    1. Tape Feeder
    Tape Feeder is the most commonly used standard feeder in SMT machine feeders. The traditional structural methods include wheel type, claw type, pneumatic type,
    and multi spacing electric type. It has now developed into high-precision electric

    type. Compared with traditional structural methods, high-precision electric type has higher transmission accuracy, faster feeding speed, more compact structure,
    and more stable performance, greatly improving production efficiency.

    The basic widths include various types such as 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, and 52mm etc. , with spacing of 2mm, 4mm, 8mm, 12mm, and 16mmetc. ;
    There are two types of reel diameter sizes: 7 inches and 13 inches.

    2. Tray Feeder
    It can be divided into single-layer structure and multi-layer structure. The
    single-layer tray feeder is directly installed on the feeder frame of the SMT
    machine, occupying multiple slots, and is suitable for situations where there is not
    much tray material; The multi-layer tray feeder has a multi-layer automatic
    conveyor tray, which occupies small space and is compact in structure. It is suitable for situations with a large amount of tray materials. The tray mounted
    components are mostly various IC integrated components.

    When using palletized materials, it is necessary to pay attention to protecting
    exposed components with large pipe corners to prevent mechanical and
    electrical performance damage during transportation and use. When using TQFP,
    PQFP, BGA, TSOP, and SSOPs components in the tray, the tray size can reach
    150mm x 330.2mm, and the height can reach 25.4mm. Interestingly, the tray
    feeder can not only provide picking up components for the SMT machine, but also
    serve as a potential throwing station for valuable components.

    3. Tube Feeder
    Tube feeders usually use vibrating feeders to ensure that the components in the
    tube continuously enter the suction position of the chip head. Generally, PLCC
    and SOIC use this method for feeding. The tubular feeder has the characteristics
    of good protection for component pins, poor stability and standardization, and
    low production efficiency.

    4. Stick Feeder
    The working method of a vibrating feeder is to freely pack the components into a
    molded plastic box or bag, and sequentially feed the components into the SMT
    machine using a vibrating feeder or feeding tube. This method is usually used for MELF and small shape semi conductive components, only applicable to non-polar
    rectangular and cylindrical components, not polar components.

    5. Special Vibration Feeder
    Special Vibration feeder, need to be customized, At present KINGSUN production
    technology is very mature of Vibration feeder, customers response all very well.

    二、According to the classification of electric and non electric, the
    common ones are electric feeder and mechanical feeder.

    Yamaha's SIGMA SMT machines are all electric feeders, while many of JUKI's
    feeder are mechanical feeders......

    Regarding feeders related knowledge, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com .

    “DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD” is a leading SMT
    automation equipment factory provider in China. With many years of profound
    experience accumulation, we provides comprehensive solutions for global
    customers with strong resources and high-quality professional technical team.