Forums » Off-Topic Discussions
Flow batteries for grid-scale energy storage
-
Flow batteries for grid-scale energy storage
In the coming decades, renewable energy sources such as solar and wind will increasingly dominate the conventional power grid. Because those sources only generate electricity when it’s sunny or windy, ensuring a reliable grid — one that can deliver power 24/7 — requires some means of storing electricity when supplies are abundant and delivering it later when they’re not. And because there can be hours and even days with no wind, for example, some energy storage devices must be able to store a large amount of electricity for a long time.Get more news about Battery Energy Storage,you can vist our website!
A promising technology for performing that task is the flow battery, an electrochemical device that can store hundreds of megawatt-hours of energy — enough to keep thousands of homes running for many hours on a single charge. Flow batteries have the potential for long lifetimes and low costs in part due to their unusual design. In the everyday batteries used in phones and electric vehicles, the materials that store the electric charge are solid coatings on the electrodes. “A flow battery takes those solid-state charge-storage materials, dissolves them in electrolyte solutions, and then pumps the solutions through the electrodes,” says Fikile Brushett, an associate professor of chemical engineering at MIT. That design offers many benefits and poses a few challenges.
Flow batteries: Design and operationA flow battery contains two substances that undergo electrochemical reactions in which electrons are transferred from one to the other. When the battery is being charged, the transfer of electrons forces the two substances into a state that’s “less energetically favorable” as it stores extra energy. (Think of a ball being pushed up to the top of a hill.) When the battery is being discharged, the transfer of electrons shifts the substances into a more energetically favorable state as the stored energy is released. (The ball is set free and allowed to roll down the hill.)
At the core of a flow battery are two large tanks that hold liquid electrolytes, one positive and the other negative. Each electrolyte contains dissolved “active species” — atoms or molecules that will electrochemically react to release or store electrons. During charging, one species is “oxidized” (releases electrons), and the other is “reduced” (gains electrons); during discharging, they swap roles. Pumps are used to circulate the two electrolytes through separate electrodes, each made of a porous material that provides abundant surfaces on which the active species can react. A thin membrane between the adjacent electrodes keeps the two electrolytes from coming into direct contact and possibly reacting, which would release heat and waste energy that could otherwise be used on the grid.
When the battery is being discharged, active species on the negative side oxidize, releasing electrons that flow through an external circuit to the positive side, causing the species there to be reduced. The flow of those electrons through the external circuit can power the grid. In addition to the movement of the electrons, “supporting” ions — other charged species in the electrolyte — pass through the membrane to help complete the reaction and keep the system electrically neutral.
Once all the species have reacted and the battery is fully discharged, the system can be recharged. In that process, electricity from wind turbines, solar farms, and other generating sources drives the reverse reactions. The active species on the positive side oxidize to release electrons back through the wires to the negative side, where they rejoin their original active species. The battery is now reset and ready to send out more electricity when it’s needed. Brushett adds, “The battery can be cycled in this way over and over again for years on end.”