Forums » News and Announcements

• freeamfva jack

  

  • 1695 posts
   

  December 16, 2022 9:08 PM EST

  All About Body Armor – 36 Facts You Need to Know

  The reason law enforcement agencies buy body armor is to save lives. To do that, officers need to understand how it actually works and how to take good care of it. Ballistic armor also needs to fit properly or it cannot offer the level of protection it’s designed to provide.To get more news about Hard Armor Plates, you can visit bulletproofboxs.com official website.

  If you want to get the most out of your body armor this article is a must read. Also, if you plan on buying bullet-resistant armor this information will help you make the right choice.
  
  In the last three decades body armor saved the lives of more than 3,000 police officers. That’s just in the United States, so it’s safe to say tens of thousands of lives have been saved worldwide. The Police Executive Research Forum (PERF) has conducted studies on the effectiveness of body armor in saving lives. Results show that by not wearing ballistic armor, police officers have 14 times the risk of dying of an injury.

  Once considered a rarity, many in law enforcement are commonly wearing body armor on the job these days. A lot of police officers in the U.S. are making a daily ritual of putting on their body armor. However, there are many facts about ballistic-resistant armor that most officers who habitually wear it are not aware of. To protect “life and limb” all officers should be fully informed about the protective vests they’re counting on to save their lives.
  BODY ARMOR IS NOT IN FACT, BULLETPROOF
  While body armor offers a great deal of protection, it can’t protect against every possible threat. It’s basically made only of layers of fabric. Agreed, a revolutionary type of fabric is used in making the vest, but a body armor vest is not “bulletproof.” No garment is, but you can count on your protective vest being bullet resistant.

  In reality, there is no substance that can claim to be totally bulletproof. In very rare instances, bullets have penetrated vests that, according to their rating, should have stopped them. This could occur from a specialized round being fired that may have more serration than usual, but who knows?

  The point is that there is no such thing as a "bulletproof vest". Wearing body armor does not protect you 100%. So, you must still be vigilant about your own safety by continuing to act responsibly. Risks you take when you don’t have your armor on would still be risky when you do have it on. Don’t be stupid; be careful.

  WHAT TYPE OF FABRIC WITHSTANDS A BULLET?
  Soft body armor contains a number of ballistic panels that consist of highly specialized and extraordinarily strong fibers. Woven or non-woven fibers make up the fabric and oftentimes, a combination of both. This particular fabric is very effective at stopping bullets. It slows them down while turning them to the side so the full force is dispersed across the panel.

  The specialized fabric more easily disperses the force coming in from mushrooming handgun rounds. Also, a bullet-resistant armor vest is more likely to stop bullets that travel more slowly. However, high-velocity rounds coming in from rifles firing hard-tipped bullets can pierce right through a soft armor protective vest.

  BALLISTIC FIBER CHOICES NOW GO BEYOND KEVLAR
  DuPont came out with the very first bullet-resistant material, which they named Kevlar. This is why you’ve heard the term “Kevlar vests” so many times over the years in this context. Kevlar is still very much in use, but manufacturers have developed dozens of other ballistic fibers in recent years. One protective vest may actually contain several different types of ballistic fibers. DuPont Kevlar, DSM Dyneema and Teijin Twaron are the top three materials currently being used in the industry.

  As with everything in life there are pros and cons to each one of these bullet-resistant fibers. For example, a woven material may have more flexibility than a laminate, but the added weight means a heavier vest. Due to the introduction of Dyneema Force Multiplier Technology, more and more body armor manufacturers have shifted towards the use of Dyneema ballistic fibers instead of Kevlar for their high-end ballistic solutions.