Precautions For Safe Operation Of Energy Ball Making Machine

  •   The hygiene of the food industry is particularly important. Why does some Siomai have mildew during the shelf life? How can manufacturers control Siomai’s mildew? The mold production environment is closely related to sanitary pollution and humidity. Especially when the pastry production process is cooked by steaming or baking, the internal and external conditions of microbial growth are changed, which controls the growth and decline of microbes and basically meets the requirements of sterility.

    The Energy Ball Making Machine production line is composed of a rolling and filling main machine and a kneading forming machine. Compared with the general Energy Ball Making Machine production line, the main machine integrates a rolling machine and a filling machine to integrate the entire main machine. More convenient and smooth. The food contact part of the whole unit is made of stainless steel to ensure stable, reliable and hygienic production and operation.

      If the physical and chemical paper cups are unqualified due to secondary cross-infection of hands, equipment and tools after secondary contamination by microorganisms in the air during the cooling and inner packaging stage, Siomai products will eventually become moldy during the warranty period. Therefore, the mildew in the production environment must be strictly controlled.

       1. Humidity is a necessary condition for mold growth, so it is very necessary to control the relative humidity in the workshop, control it below 55%, and control the temperature below 24 degrees Celsius. So as to reduce the environment required for mold production.

      2. The console, equipment, and tools are all places in direct contact with food, so it is very necessary to do a good job of disinfection in these places. They must be disinfected with 75% ethanol, and the disinfection work on the ground should not be relaxed. Use peroxide disinfectants or chlorine-containing disinfectants for disinfection.

      3. The console, tools, and ground must be disinfected once before get off work in the afternoon, and the space should be disinfected with ozone and ultraviolet rays after work. Do not relax twice a day.

      4. In order to reduce the conditions for mold reproduction, it is necessary to control the water content in Siomai of Siomai Making Machine and use negative pressure exhaust air to perform dehumidification work. To prevent oxygen from being mixed into nitrogen, it is necessary to check the purity of nitrogen.