Some Uses Of Threaded Rods And Eye Bolts
-
Posted by weigao fasteners - Filed in Business - #Hexagon Flange Bolt， Threaded Rods And Eye Bolts - 479 views
No matter what it is from high-strength bolts to the production and processing technology of Hexagon Flange Bolt, to the safety quality inspection of Hexagon Flange Bolt, and finally to scientific storage and transport to the construction site for standard installation, I believe all partners have a very detailed understanding! High-strength bolts, as one of the fasteners, have extremely strict production processes, and have relatively strict operating specifications in every link, but there are some small details that few people can do, which needs to be done Organize it and implement it. The following editor will sort out some details.
Other specification requirements for high-strength bolt installation
When we assemble the high-strength bolt connection, the side of the nut with the round table should face the chamfered side of the washer. Generally, when assembling a large hexagon head high-strength bolt connection, the chamfered side of the washer under the bolt head should face the head of the bolt. When installing the Threaded Rods And Eye Bolts, the construction personnel must not force the bolts to be penetrated (in this case, it means hammering). If it cannot penetrate freely, the hole should be trimmed with a reamer. After trimming, the maximum diameter of the hole should be less than 1.2 times the diameter of the bolt. When repairing holes, in order to prevent iron filings from falling into the seam of the board, we must tighten all the surrounding bolts before reaming, and check whether it is firm, and then operate the board after stacking tightly. One place to pay great attention to here is that it is strictly forbidden to use gas cutting to ream. Gas cutting and reaming are more likely to happen on site, and special inspections are required.