2 quick Solutions to Fix Brother Printer Error Light and Flashi

• Posted by James Smith February 2, 2021 - Filed in Technology - #Brother Printer Error Light  - 1,076 views

  Users of Brother Printer, at times, are perturbed by the flashing lights in the printer. This is one of the prevalent error codes and usually comes forth when the drum counter isn’t installed in the correct orientation or place. If you are rattled by the brother printer error light and brother Flashing Error LED issue, you can take a sigh of relief! This article provides some expeditious methods to sort this error.

   

  

  
  
  

   

  Brother printer troubleshooting steps to fix flashing lights error

  The 2 quick and easy solutions to solve this glitch are as follows.

  Resetting the drum

  1. Dismount the cartridge and drum unit.
  2. Halt for at least 10 seconds.
  3. Place the drum unit and cartridge in their accurate position.
  4. If the drum LED flashes, it indicates that the drum printer hasn’t been reset.
  5. Tap and hold the Go button, until all 4 LEDs light up.
  6. Once they illuminate, you could let go of the Go button.
  7. Close the cover and voila, your drum unit is reset.

  <pre class="wp-block-preformatted">Also Read:: <a href="https://www.printertollfreenumber.com/blog/brother-printer-not-printing/">Brother Printer Not Printing</a></pre>

  Inspecting the printer unit

  The Brother printer all lights flashing glitch could also step because of fault cartridges or some other hardware glitch. Inspect whether all cables are connected properly. Also, ensure that the brother printer drivers are up-to-date. You could also try to reset the cartridges as follows:

  • Unbolt the top panel, unlatch the cartridge lock chips, and remove them carefully.
  • Halt for a minute.
  • Set one cartridge at a time inside and close the printer.
  • Try a demo print. If the error subsidies, insert the other cartridge as well.
  • Close the printer and your printer shall function properly.

  Still, facing an issue?

  If the methods stated above didn’t fix the brother printer error light, fret not. You can dial our Brother printer customer support and leave your worries on us. Our experts shall confer instructive advice that shall resolve your issue.