The Working Principle Of Flat Screen Printing Machine

  • For Stenter, below, we will continue to introduce the products of this website, that is, the explanation of its related knowledge, or the answers to related questions, so that everyone can continue to learn and understand on the basis of the existing ones. Thus, to increase one's own professional knowledge in this area, to get new gains from it.
     
    1. What is the working process of the stenter setting machine?
     
    The working process of the stenter setting machine, in specific terms, is:
     
    First, the unshaped cloth is fed into the setting machine through the stripper open width, and then the two ends of the cloth are hung on the needle plate, and the two ends of the needle plate are brought into the oven along with the mechanical operation. . After that, it is heated in an oven, and when it enters the end, it is cooled and destaticized. In this way, its swing can be dropped into the cloth car, thereby obtaining the desired effect.
     
     
    2. In the stenter setting machine, what is the burner used generally? In addition, if the stenter setting machine produces an oblique position, how to deal with it?
     
    In the stenter setting machine, the burners used generally depend on the technical requirements and the specific configuration. Therefore, there are many brands for everyone to choose from. As for the oblique position of the stenter setting machine, the treatment is: if the setting machine has two motors, then it can be solved by adjusting the motor speed, and if it is one motor, then it is Weft straighteners are added to the cloth feed frame and the front of the car.
     
    3. After the jersey passes through the stenter setting machine, if there are vertical stripes on the surface, what is the problem?
     
    If this problem occurs on the stenter setting machine, then the specific reason is: the shrinkage rate of the fabric structure is too large. Moreover, sometimes, this is also inevitable. Through the stenter setting machine, only fine adjustments can be made, but this problem cannot be completely solved. Therefore, everyone should pay attention to it and not take it lightly.
    The stenter setting machine, for this kind of machinery and equipment, I must be familiar with it, because there is an explanation about this in the front. Therefore, in order for everyone to have the content to continue learning, and to enhance their understanding and understanding, the following editor will give a good explanation in this area, so as to achieve the above purpose.
    Flat Screen Printing Machine, its working principle, its main is:
    The unshaped cloth is fed into the machine through the stripper open width, so that both ends of the cloth width can be hung on the needle board. After that, through the movement of the needle plate, the cloth width is sent into the oven, and passed through several constant temperature ovens with different temperatures, and then the tail end is cooled and static electricity is removed. After that, the cloth width falls into the cloth car, thus completing the whole setting process.
    Question: Is the width of knitted fabric related to the setting machine?
    Answer: The width of knitted fabric has nothing to do with the setting machine, because the setting machine can only play a fine-tuning role.