BEARING STORAGE
-
We are a Deep Groove Ball Bearings Manufacturer, share it below
Bearings are an important part of major industrial equipment. Bearing problems can cause
Equipment shutdowns, damages and malfunctions make users pay a high price for this. in addition,
Large industrial bearings also mean huge capital investment.
In order to make the equipment run well and reduce possible maintenance costs, it is important
It is to comply with the appropriate method of operation. This includes bearing storage, disassembly, cleaning, and inspection
And installation.
The service life of any bearing depends to a large extent on the attention to the bearing
And maintenance. Especially when the operating conditions are bad, the load is heavy, and the pollution and
In rusty industrial applications, the attention and maintenance of bearings is even more important.
Operation and inspection procedures for different types of bearings can be found in the relevant chapters. This chapter
Mainly describe the general operating procedures and methods of various rolling bearings.
Bearing storage
Bearings can be coated with a special corrosion-resistant coating, but most bearings are not made of corrosion-resistant
Made of corrosive materials. When handling and storing bearings, care must be taken to ensure that they
Will not rust or corrode. Even if a small amount of moisture or chemicals remains due to gloves or hands
Staying on the unprotected bearing surface will also produce tiny corrosion areas, causing the shaft
Bearing initial fatigue.
The surface of the new and repaired bearing is coated with protective material, and use protective paper or
The materials are wrapped and transported in wooden boxes. After receiving the bearing, it is ready to be installed and used
Before, please do not take out the new or repaired bearing from the package.
Do not put the bearing directly on the concrete floor where water can collect on the bearing surface
superior. The bearing should be stored on a pallet or bracket, where the bearing will not be affected by
High humidity or sudden temperature changes cause condensation to form.
Be sure to put a greased oil between the roller of the tapered roller bearing and the raceway of the outer ring
Paper, if there is no greased paper, put a plastic film on it.
Our company has many other products, such as Flanged Ball Bearings, etc. Welcome to visit our company!