Tire Punctured And Need To Be Replaced Immediately

• Posted by snip snip March 2, 2022 - Filed in Other - #Tire Repair Tools  - 1,014 views

     Anyone who owns a car knows what may happen to our tires. It may need to be repaired or replaced from time to time. It is possible to use tire repair tools. After the tire is damaged, it can sometimes be repaired and does not need to be replaced.

    1) Repairable tires

     Tires can be repaired when:

    It is punctured within the puncture repair area of ​​the tire, and the puncture is no larger than 1/4 inch in diameter

    And the repairs don't overlap, or if the damage doesn't directly cross each other

    At this time, tire repair will go through the following processes:

  1. Remove the tire from the rim
  2. Thoroughly inspect the inside and outside of the tire
  3. Although the tire may look simple from the outside, the bottom half of the nails can cause potential damage to the inner sidewall
  4. Once deemed fixable, trim the punctured area of ​​the damaged cable to clean and stabilize the area
  5. From the inside out, pass the rubber rod through the puncture area inside the sealed tire

      The puncture site is polished from the inside and then a special vulcanizate is applied

  1. A patch is then installed on the liner above the puncture area, causing a chemical reaction

     Then put the tire back on the rim, inflate to the proper tire pressure, and check the repair for leaks. This process takes 60-90 minutes to complete properly.

     Let's talk a little more about non-repairable tires in the next section.

  Ningbo Yinzhou Xinbang Pneumatic Tools Factory is a Chinese manufacturer of pneumatic tools. The company mainly produces and sells Pu Air Hose, Air Filter Regulator, Air Duster Gun, and other types of tools. Its products mainly include air couplers, air tools, hand tools, and electronic tools.