Do You Know That Tianfu Is Knitting Fabric Manufacturer?

• Posted by Tian fu January 26, 2021 - Filed in Arts & Culture - #knitting fabric manufacturer blockout fabric  - 1,260 views

  There are so many different knit fabrics Introduced by knitting fabric manufacturer! Jersey (viscose, cotton, tencel etc); college; french terry; interlock; ribbing; and so on... These fabrics are so much fun to sew! We'd say they are more forgiving than non-stretch fabrics since the sewn garments will shape with the body.

  Knit fabric doesn't fray, which means that you don't have to finish seams, which you would do with woven fabrics. Neither does knit get wrinkly, as much as woven fabrics usually do. They do shrink when washing for the first time, so you'll want to pre-wash the fabric before cutting into it.

  Knit fabrics can have different amounts of stretch. For example, generally ribbing has a lot of stretch, while jersey and interlock has less. But it depends on if and how much lycra is in the fabric. Find more info in our fabric guide (coming soon).

  It's a good idea to evaluate the stretch of the fabric before sewing. For some sewing patterns the amount of stretch needed in the fabric is specified. Download our free stretch guide.

  SEWING IN KNIT FABRIC WITH A SEWING MACHINE
  When you're sewing in knit fabric a serger (overlocker) is great to use. But it's not necessary and you can achieve really nice results with a regular sewing machine too. These are our best tips!

  
  Use the correct needle
  The most important thing is to switch out your universal needle on the sewing machine for a stretch needle. They have a rounded tip which won’t ruin the fabric. The same goes for your twin needle, if you’re using one. That one should also be stretch.

  Use a stretch stitch
  This is really important, especially for horizontal seams where stretch is needed (e.g. the neckline). A seam that doesn’t require much stretch, e.g. vertical seams such as the side seams, can be sewn with a narrow zigzag stitch.
  A: Overlock stitch, for that you will need an overlocker/serger.
  B: Narrow zig zag stitch (approx. 1,5 mm wide and 1,5 mm long).
  C: Wide zig zag stitch (approx. 2,5 mm wide and 2,5 mm long).
  D: Twin stitch (switch out the needle for a twin needle, and use a stitch length of approx. 3 mm).

  Don’t pull the fabric
  Try not to pull the fabric as you’re sewing. That generally results in a wavy seam. Neither should you let the fabric hang down from the table. Lift it up so that it can be easily fed into the machine.
  Press seams
  Always press a seam after you’ve sewn it. Don’t wait until the entire garment is finished. Pressing is often the thing that takes away that “homemade” look and gives the garment a professional feel. When you’re pressing, the thread “melts” into the fabric.

  Adjust the presser foot pressure
  Does the fabric's edge get stretched and rippled after you sew? Try lowering the pressure of the presser foot. This will keep the foot from holding the fabric back, preventing the fabric from stretching as it moves under the presser foot.

  Use a walking foot
  If none of the above helps you could try switching to a walking foot (B) instead of a regular presser foot (A). It makes sure to evenly feed the fabric and keeps it from stretching as you sew. We often use our walking foot, especially for topstitching.

  If you are interested in blockout fabric, welcome to contact us!