2h Heavy Hex Nuts Manufacturers Introduces The Working Principl
-
There are generally two kinds of lock nuts. One is to use two identical nuts to be screwed on the same bolt, and a tightening torque is added between the two nuts to make the bolt connection reliable; the other is a special lock nut, It needs to be used together with a kind of anti-loose gasket. The special lock nut is not a hexagonal nut, but a middle round nut. There are 6 notches on the circumference of the nut. These six notches are not only the focus of the tightening tool, but also the locking of the lock washer bayonet. Place. The second anti-loose method is more reliable than the first, but the structure is relatively complicated.
2H Heavy Hex Nuts Manufacturers introduced that the working principle of lock nuts is self-locking by the friction between the nut and bolt. However, the reliability of this self-locking under dynamic load will be reduced. In some important occasions, we will take some anti-loosening measures to ensure the reliability of the nut locking. The use of a lock nut is one of the anti-loosening measures.
In some important occasions, we will take some anti-loosening measures to ensure the reliability of the nut locking. The use of lock nuts is one of the anti-loosening measures. The working principle of the nut is self-locking by the friction between the nut and the bolt. However, the reliability of this self-locking under dynamic load will be reduced.
Through the above introduction, Heavy Hex Bolt Factory hopes that you can simply refer to the content of this article in future use.