Jin hong
What's New
-
Jin hong wrote a new blog entry:
It’s important for a manufacturer to have a basic understanding of the cleaning and repair required for proper tool maintenance. To keep a tool in the best working order, maintenance of Mold date insert is essential not only when issues arise, but a...- November 3, 2021
- Jin hong wrote a new blog entry: Some other common materials used for Injection plastic mold include polycarbonate, nylon, acrylic, and polyoxymethylene. Each of these materials have their advantages and disadvantages, which is why, when determining which material to work with, you need ...
- Jin hong wrote a new blog entry: When working with a molder, it’s important to understand the problems that can arise during the process of Injection plastic mold. Some issues are inevitable, but the information you gain here will help you know what to look out for. With this in mi...
- Jin hong wrote a new blog entry: High Tooling Costs: Tooling cost for Injection plastic mold is determined by the number of pieces needed (how many cavities will be required), part complexity, and part size. While single cavity prototype tooling can be around $3,000-$10,000, in the autom...
- Jin hong wrote a new blog entry: The Injection plastic mold from Plastic mold factory is one of the most popular and versatile methods for mass producing plastic parts, as it has multiple advantages over other methods of plastic moulding.
Involving feeding plastic material into a heated... - Jin hong wrote a new blog entry: 1) High tooling costs and long set up lead times. Up-front costs are high due to the design, testing, and tooling required. There is the initial design and prototyping (probably via CNC or 3D printing), then the design of a prototype mould tool to produce...
- Jin hong wrote a new blog entry: 1) Fast production and highly efficient. Injection moulding from Injection mold maker can produce an incredible amount of parts per hour. Speed depends on the complexity and size of the mould, anywhere between 15-120 seconds per cycle time.
2) Low labour... - Jin hong wrote a new blog entry: In general, an Injection plastic mold should cost anywhere between $1,000 and $80,000, the average cost is around $12,000. This investment is only part of the story, however, as another factor is just as important; cost per part.
The cost per partWhen it... - Jin hong wrote a new blog entry: As growing attention is paid to the impact humanity has on our planet, offering sustainable materials and processes is increasingly critical to protecting our future. Plastics manufacturers have a vested interest in developing and supporting products and ...
- Jin hong wrote a new blog entry: The Injection plastic mold is fairly similar to extrusion moulding. The difference here is that with injection moulding the melted plastic is injected directly into a custom mould. The injection is under high pressure so that the mould is filled and a sol...
- Jin hong wrote a new blog entry: It is well known that the Injection plastic mold used to create plastic parts ranging from water bottles to automobile bumpers are the most critical – and expensive – part of the injection molding process. In some cases a single mold can cost ...
- Jin hong wrote a new blog entry: The Injection plastic mold, one of the most vital process required, is required to taken into utilize to shape plastic using a rigid frame or mould. Not to mention the way of using technique that allows for the creation of objects of all shapes and sizes ...
- Jin hong wrote a new blog entry: When it comes to forming plastics, design considerations given by Injection mold maker are similar to those associated with casting metals. It is critical to choose the right material among an extensive list of options based on
(a) service requirements,(... - Jin hong wrote a new blog entry: If you’ve ever flipped open a bottle of ketchup or tube of toothpaste, you’ve used a living hinge. A living hinge is formed as an extension of the base and cap material, which in many cases is polypropylene plastic. This thin piece of material...
- Jin hong wrote a new blog entry: 　　With the development of Plastic Compression Springsapplication technology, more requirements are put forward for plastic compression springs materials. Mainly in terms of improving fatigue life and anti-relaxation performance under high stress; secondly...
- Jin hong wrote a new blog entry: ProsThe Injection plastic mold machine are cheap to buy and have better injection rates. They have better ejection capability given that they are more potent than other injection molding machines. They are available in abundance all over the world, so it ...
- Jin hong wrote a new blog entry: When you think of the great inventions of modern history you probably think of automobiles, airplanes, computers, and other revolutionary innovations. While these developments are vital, have you ever considered the multifaceted manufacturing processes, m...
- Jin hong wrote a new blog entry: With over 5,500 plastic injection-molding companies in the United States, product manufacturers are challenged with choosing the best partner to help mass produce a product or production element for a business. When you need thousands of parts produced on...
- Jin hong wrote a new blog entry: How many thermoplastic resins does your company use?If you are using a wide variety of resins, it may be time to review and consolidate. Using a large cross-section of resins can cost your company a lot of time and money. There are many benefits to consol...
- Jin hong wrote a new blog entry: We are blessed to be living in the age of information. Whether it’s historical publications, how-to videos, scientific data, conspiracy theories, or suppliers for a product you’re looking for, most people in America have it all at their finger...
- Jin hong wrote a new blog entry: Automated Injection plastic mold is useful throughout a wide variety of industries and applications. Common uses for automated processes include:
Loading and unloading. The loading and unloading process for plastic injection molding machines uses a lot o... - Jin hong wrote a new blog entry: In order to start and operate a Injection plastic mold facility there are lots of costs involved, both direct and indirect.
Capital requirements at the beginning of the project.Costs related to processing,Raw materials,And countless others of which some ... - Jin hong wrote a new blog entry: Plastic product bursting is a problem that many auto mold processing manufacturers encounter more customer consultations. The same problem is also a quality problem that occurs more frequently. This problem can be said to be very serious. Then, the follow...
- Jin hong wrote a new blog entry: Flow linesFlow lines introoduced by Injection mold maker appear as a wavy pattern often of a slightly different color than the surrounding area and generally on narrower sections of the molded component. They may also appear as ring-shaped bands on a pr...
- Jin hong wrote a new blog entry: There are three types of Injection plastic mold release coatings within our Nano Mold Coating family and two ways to apply them, depending on the type of coating you’re using. Our HC and HCF (the food-grade alternative to HC) coatings are applied in...
- Jin hong wrote a new blog entry: Health and beauty products of Injection mold maker generally have very specific product and packaging requirements. Injection molding techniques are particularly well suited to satisfying these requirements in an effective, efficient way. FunctionalityFro...
- Jin hong wrote a new blog entry:
factors when developing an injection mold design. There are a lot of excellent material suppliers offering quality materials for the injection molding process. Many also offer different grades or blends of materials to choose from. However, one wr... - Jin hong wrote a new blog entry: In the world of plastics manufacturing, there has been a definitive line between 3D printed parts and Injection plastic mold. However, in recent years, that line has blurred as more injection molders not only see the value in 3D printing for prototyping p...
- Jin hong wrote a new blog entry: In plastic injection molding, cooling rate is the last section of the molding cycle.
The cooling rate introduced by Injection mold maker is a decreasing rate from the time the plastic resin enters the mold until the last cavity of the mold is filled.
Th... - Jin hong wrote a new blog entry: You’ve designed your part, created the tooling, and are ready to begin the Injection plastic mold process. But then, there is a change of plans. Rather than using ABS plastic, you will now be making the parts out of nylon. No problem. Just have some...
- Jin hong wrote a new blog entry: Plastic injection molding introduced by Injection mold maker is a manufacturing process with the principle ability of handling extremely large amounts of bulk parts production. It is important to note, however, that there are several processes when it com...
- Jin hong wrote a new blog entry: Injection moulding is one of the most popular and versatile methods for mass producing plastic parts, as it has multiple advantages over other methods of plastic moulding. Injection mold maker would introduce more information to you.
Involving feeding pl... - Jin hong wrote a new blog entry: Material Choice and Part Weight,The plastic material selection you make for your plastic part is not only critical to the part’s function, it also plays a huge role its cost to manufacture. Raw plastic material cost can range in price from $1 per po...
- Jin hong wrote a new blog entry: Automated plastic injection molding is useful throughout a wide variety of industries and applications. Injection mold maker introduced that common uses for automated processes include:
Loading and unloading. The loading and unloading process for plastic... - Jin hong wrote a new blog entry: There are many reasons for going with injection molding as your chosen process in plastic manufacturing. First off, it continually proves to execute absolute accuracy with its consistency of detailed features. High precision recommended by Injection mold ...
- Jin hong wrote a new blog entry: When you think of the great inventions of modern history you probably think of automobiles, airplanes, computers, and other revolutionary innovations. While these developments of Injection plastic mold are vital, have you ever considered the multifaceted ...
- Jin hong wrote a new blog entry: There are many reasons for going with injection molding as your chosen process in plastic manufacturing. First off, it continually proves to execute absolute accuracy with its consistency of detailed features. Injection mold maker suggested that precision...
- Jin hong wrote a new blog entry: Injection mold maker suggested that plastic injection molding is an extremely versatile production process, capable of simple or complex designs in a range of volumes with fast turnarounds. To begin, plastic material is melted and injected under pressure...
- Jin hong wrote a new blog entry: Mold polishing is primarily a manual process requiring a high level of skill and knowledge. There are a number of finishes available to mould makers and the final finish depends upon the plastic part requirements. Injection mold maker would give you some ...
- Jin hong wrote a new blog entry: Here’s a more detailed outline of the common uses of small Plastic Compression Springs. They include:
ToysMattressesElectronicsMedical devicesPens or notebooksIndustrial equipmentMining and drilling equipmentPrecision instruments and toolsThe list ... - Jin hong wrote a new blog entry: We are Plastic mold factory and want to introduce pros and cons of injection molding tool transfer.
What are the benefits of an injection molding tool transfer?
It’s important manufacturing competencies and quality requirements are evaluated as ea... - Jin hong wrote a new blog entry: Up front costs tend to be very high due to design, testing, and tooling requirements. If you are going to produce parts in high volumes you want to make sure you get the design right the first time. Plastic mold factory advised that it is more complicated...
- Jin hong wrote a new blog entry: In 1868, John Wesley Hyatt became the first person to inject hot celluloid into a mold, producing billiard balls. In 1872 John and his brother Isaiah patented an injection molding machine that used a plunger, and the process remained more or less the same...
- Jin hong wrote a new blog entry:
1.RecordingThe working state of the mold is usually recorded in detail.
Statistics given by Plastic mold factory on the use and care of the mold (lubrication, cleaning, rust prevention) and damage.
Based on this, you can find out which parts and... - Jin hong has just signed up. Say hello!