pss orous ceramic filter

  • porous ceramic filter is a new type of filter with low density, high porosity and 

     

    a three-dimensional network framework structure. It is widely used in the 

     

    aluminum processing industry to filter molten aluminum to improve the quality of 

     

    aluminum.

    porous ceramic filter can effectively remove the non-metallic solid mixture in the aluminum and 

     

    aluminum alloy melt, reduce the trapped gas, and provide laminar flow to make the 

     

    filtered aluminum and aluminum alloy cleaner.

    Clean metal can improve the quality of castings, reduce scrap, reduce inclusion 

     

    defects, improve the quality of aluminum alloy and other non-ferrous alloy 

     

    castings, and reduce the cost of castings. Its maximum use temperature is 

     

    1200°C.

     

    porous ceramic filter

    porous ceramic filter has the advantages of high porosity, high mechanical 

     

    strength, stable chemical performance, strong corrosion resistance, high 

     

    adsorption rate, good filtering function, and good thermal shock resistance.

    It is mainly used in the purification process for the production of non-ferrous 

     

    alloys such as aluminum and aluminum alloys. It can also be used as a gas-solid, 

     

    liquid-solid separation medium, catalyst carrier, burner, sound absorption and 

     

    environmental protection.

    A gasket is installed on the edge of theporous ceramic filter ;the gasket ensures 

     

    the correct and tight position of the filter in the filter box.

    There are different types of gaskets, such as ceramic fiber gaskets, etc., and 

     

    porous ceramic filter without gaskets can also be provided.

    These types of filters have been favored by customers from Europe, the Middle 

     

    East and the United States for many years.

     

    Product Features of porous ceramic filter High strength, no loose ceramic 

     

    particles or powder

    Three-dimensional connected mesh structure with high porosity.

    The surface area of ​​slag collection is large, and the internal surface area of ​​

     

    filtering is large,

    Excellent thermal shock resistance.

    Various sizes, shapes and apertures are available.

    Particles larger than the pore size are captured on the top of the ceramic foam 

     

    filter

    The smaller particles will be trapped on the filter cake by the larger particles

    The finer particles are trapped in the pores of the filter

     

    Cast aluminum billets include smelting, purification, impurity removal, 

     

    degassing, slag removal and casting processes, and homogenization processes.

    The main process is:

    (1) Ingredients: According to the specific alloy grade to be produced, calculate 

     

    the addition amount of various alloy components, and reasonably match various raw 

     

    materials.

    (2) Smelting: The prepared raw materials are added to the smelting furnace to 

     

    melt according to the process requirements, and the slag and gas in the melt are 

     

    effectively removed by means of degassing and refining slag.

    (3) Casting: Under certain casting process conditions, after the molten aluminum 

     

    is cooled, it is cast into various specifications of round casting rods through 

     

    the deep well casting system.