Potassium Methyl Siliconate Factory Introduces The Details Of T

• Posted by ritchie silways May 17, 2022 - Filed in Other - #Potassium Methyl Siliconate  - 717 views

   

  In the process of renovating a house, many places need to do waterproof construction, and in the waterproof construction, generally need to use waterproofing agent, but many people do not know much about waterproofing agent, the following, Potassium Methyl Siliconate Factory introduces the waterproofing agent Instructions:

  1. If the waterproofing agent is used in the construction of waterproof mortar, the sediment, dust and debris on the ground base should be cleaned up first, and then the waterproofing agent and water should be fully stirred together according to a certain proportion, and then the mixture should be mixed. Mix well with cement and medium sand.

  2. Then apply the waterproof layer twice on the ground, and the thickness of each layer should be about 10 mm. The bottom layer should be smeared with a layer of 1 mm plain water slurry, and then smeared with waterproof mortar. When the waterproof mortar is initially set, it can be compacted, and then use a wooden trowel to rub the surface into a pockmarked surface.

  Through the above introduction, Mold Release Agent Factory hopes that you can simply refer to the content of this article in future use.