Small Drinking Water Pump Factory Introduces The Use Skills Of

  •  

    Small Drinking Water Pump Factory introduces the requirements for the use of cosmetic plastic packaging:

    Usually used in cosmetics containers with thicker walls, the cream bottles, bottle caps, stoppers, gaskets, pump heads, and dust covers are injection molded; PET blow molding is two-step molding, tube embryo is injection molding, and the finished packaging is blown bottle. Others, such as emulsion bottles and washing bottles with thin container walls, are blown bottles.

    PET material is an environmentally friendly material with high barrier properties, light weight, non-breaking characteristics, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent. It is widely used in gel water. The bottle mouth is generally standard 16#, 18#, 22#, 24# caliber, which can be used with a pump head.

    The acrylic material is injection-molded bottle, which has poor chemical resistance. Generally, it cannot be directly filled with paste. It needs to be blocked by an inner tank. The filling is not easy to be too full to prevent the paste from entering between the inner tank and the acrylic bottle. Cracking, high packaging requirements during transportation, it looks particularly obvious after scratches, high permeability, and the sensory upper wall is very thick, but the price is quite expensive. AS, ABS: AS has better transparency and toughness than ABS.

    Through the above introduction, Electric Drinking Water Pump Factory hopes that you can simply refer to the content of this article in future use.